Ripustuskannatin Hikvision DS-1271ZJ-120 musta ulkokäyttöön 4,5 kg

The Hikvision DS-1271ZJ-120 Black Outdoor pendant bracket is a metal mounting accessory designed to support outdoor surveillance cameras. With a slim cylindrical profile 12 cm in diameter and 563 mm in height, the bracket provides a stable hanging point for dome and bullet cameras where downward-facing installation is required. The pendant design positions the camera below the mounting surface, enabling clear downward viewing angles and protected cable routing through the bracket body.

Advantages

This pendant bracket is constructed for outdoor environments, offering corrosion-resistant finish and a robust structure capable of supporting devices up to 4.5 kg. Its 12 cm diameter and 563 mm length provide sufficient clearance from the mounting surface to reduce mounting obstructions and allow effective installation beneath eaves or ceilings. The black color integrates discreetly with many exterior décors and helps minimize reflections around the camera housing.

Suitable for

• Mounting dome or bullet surveillance cameras in outdoor locations
• Installations that require downward-facing camera orientation from ceilings, soffits, or overhangs
• Locations needing protected cable passage through the mount to the camera
• Setups where a durable, weather-resistant pendant arm is required

Key specifications

• Material: metal construction with weather-resistant finish
• Maximum supported load: 4.5 kg
• Outer diameter: 12 cm
• Height/length: 563 mm
• Color: black
• Mounting type: pendant / hanging bracket for exterior use

How to use

Choose a structurally sound overhead mounting surface able to support the combined weight of the bracket and camera. Secure the bracket base to the mounting surface using appropriate anchors or screws for the substrate (concrete, wood, or metal). Route camera cables through the bracket body to achieve protected cabling and connect to the camera according to its installation guide. After attaching the camera to the bracket, adjust the camera orientation and tighten all fasteners to ensure a stable installation.

Recommendations

For reliable long-term performance, use corrosion-resistant fasteners and verify that the mounting surface and anchors are rated to support at least the bracket plus camera weight. Apply silicone or suitable sealant at exterior cable entry points to prevent moisture ingress. Periodically inspect the bracket and fastenings for signs of corrosion or loosening, especially in coastal or industrial environments.