Samsung - DDR4 - moduuli - 8 GB - DIMM 288-PIN - 3200 MHz / PC4-25600 1.2 V rekisteröity ECC

The Samsung M393A1K43DB2-CWE is an 8 GB DDR4 memory module with a 3200 MHz clock speed. Built in a 288-pin DIMM form factor and operating at 1.2 V, this module is intended for use in PCs and servers where reliable performance and compatibility are required. It provides a straightforward way to increase system memory capacity and improve multitasking and application responsiveness.

Advantages

This Samsung DDR4 8 GB 3200 MHz module delivers a proven DRAM solution with low power consumption and stable operation. Its 288-pin DIMM format ensures compatibility with standard desktop and server motherboards that support DDR4, while the 3200 MHz speed offers improved data throughput compared with lower-frequency modules. The 1.2 V operating voltage helps reduce power draw without sacrificing performance.

Suitable for

• Upgrading desktop PCs to increase RAM capacity
• Server memory expansions where compatible DDR4 DIMMs are supported
• Multitasking, office applications and light to moderate content creation workloads

Key specifications

• Model: M393A1K43DB2-CWE
• Capacity: 8 GB
• Type: DDR4
• Speed: 3200 MHz
• Form factor: 288-pin DIMM
• Voltage: 1.2 V

How to use

Power off the system and disconnect from mains before installing the memory module. Open the computer or server chassis, locate an empty compatible DDR4 288-pin DIMM slot, and align the module with the slot key. Firmly press the module into the slot until the retaining clips engage. After installation, close the chassis, reconnect power and boot the system. Verify that the BIOS/UEFI recognizes the new 8 GB module and that the system reports the expected total memory and speed.

Recommendations

Install memory modules in matched pairs or according to the motherboard vendor’s recommended configurations to ensure optimal performance and correct dual- or multi-channel operation. Check motherboard compatibility lists for supported speeds and voltages before upgrading.