SFP+ lähetin-vastaanotin BlueOptics 02310SNN-BO kuitu 10000 Mbit/s

The BlueOptics 02310SNN-BO SFP+ transceiver is a fiber optic module designed for 10 Gbit/s Ethernet and other high-speed optical links. It uses an SFP+ interface and a duplex LC connector for single-mode fiber connections. The module supports a maximum data transfer rate of 10000 Mbit/s, has a compact chrome-coloured housing and weighs approximately 20 g. It is RoHS-, CE- and FCC-compliant and compatible with a range of Huawei platforms that accept equivalent SFP+ modules.

Advantages

The transceiver provides a standard SFP+ form factor for straightforward hot-pluggable installation into supported network equipment. Its single-mode fiber optics design and LC duplex connector enable simultaneous transmit and receive channels over separate fibers. Certified compliance with RoHS, CE and FCC ensures regulatory conformity for professional deployment. The module's low weight and compact dimensions facilitate dense installations and minimize mechanical stress in populated racks.

Suitable for

• 10 Gbit/s Ethernet uplinks and aggregation links
• Fibre Channel over Ethernet and high-speed storage networking
• Long-distance single-mode fiber connections where LC duplex is used
• Replacement or upgrade of compatible SFP+ transceivers in Huawei-compatible hardware

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Connector: LC duplex (single-mode fiber)
• Fiber type: Single-mode
• Product colour: Chrome
• Weight: 0.02 kg
• Regulatory compliance: RoHS, CE, FCC

How to use

Ensure the target device supports SFP+ transceivers and the specific optical specifications required for your link. Power down or follow your device's hot-swap guidelines, then insert the BlueOptics 02310SNN-BO into an available SFP+ slot until it seats securely. Connect LC duplex single-mode fiber patch cords with correct transmit/receive orientation and verify link status in the host equipment. Monitor the link and diagnostics through the host system if digital diagnostic monitoring is supported by the hardware.

Recommendations

Use quality single-mode LC duplex patch cords and appropriate fiber panels to achieve optimal range and signal performance. Confirm that the host device firmware and port settings are compatible with third-party SFP+ modules to enable full functionality and any supported diagnostic features.