SFP-lähetin-vastaanotin BlueOptics 10G-SFP-BXD-S-BO 10000 Mbit/s kuitu

The BlueOptics 10G-SFP-BXD-S-BO is a 10 Gigabit SFP+ fiber optic transceiver module designed for high-speed network links. Supporting a maximum data transfer rate of 10000 Mbit/s and link distances up to 10000 m, this compact SFP+ form-factor module uses an LC (UPC) fiber connector and comes in a silver housing. With a mean time between failures (MTBF) of 1,000,000 hours and a lightweight 20 g construction, the module is intended for use in network switches, routers and media converters that accept SFP/SFP+ interfaces.

Advantages

The module provides a 10 Gigabit Ethernet interface in an industry-standard SFP+ form factor, enabling simple hot-plug upgrades and compatibility with equipment that supports SFP transceivers. Its long maximum transfer distance and LC (UPC) connector make it suitable for single-mode fiber links over extended runs. The compact size and low weight reduce space and power constraints in dense network environments, while the high MTBF indicates design focus on continuous operation and reliability.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• Long-reach single-mode fiber connections (up to 10 km)
• Data center server to switch connections requiring SFP+ ports
• Media converters and optical modules in enterprise networks

Key specifications

• Maximum data transfer rate: 10000 Mbit/s
• Maximum transfer distance: 10000 m
• Ethernet interface type: 10 Gigabit Ethernet
• Fiber optic connector: LC (UPC)
• Form factor: SFP+
• Product colour: Silver
• Weight: 0.02 kg
• Design MTBF: 1,000,000 hours

How to use

Install the BlueOptics 10G-SFP-BXD-S-BO by inserting the transceiver into an available SFP/SFP+ slot on a compatible switch, router or media converter until it clicks into place. Connect the LC (UPC) fiber patch cable to the transceiver and the remote device, observing proper fiber polarity and handling to avoid contamination. Configure the network device port for 10 Gigabit Ethernet operation if required by the host system. Follow equipment vendor guidance for link negotiation, required drivers or firmware compatibility.

Recommendations

Use single-mode LC (UPC) fiber for runs approaching the maximum transfer distance and keep connectors clean to ensure signal integrity. Verify host device compatibility with SFP+ modules and consult equipment documentation for supported transceiver types before installation.