SFP+-lähetin-vastaanotin BlueOptics 45W2420 10000 Mbit/s 1310 nm

The BlueOptics 45W2420 SFP+ transceiver is a compact fiber optic module designed for high-speed network links. It supports a maximum data transfer rate of 10000 Mbit/s and operates at a wavelength of 1310 nm, providing a reliable optical interface for compatible switches, routers and media converters. The module uses an SFP+ form factor and is intended for single-mode or multimode fiber installations where a 10 Gbps uplink or cross-connect is required.

Advantages

The transceiver delivers consistent 10 Gbit/s performance with a standardized SFP+ interface for hot-plug installation and easy interoperability with equipment that accepts SFP+ modules. Its fixed operating wavelength of 1310 nm is suitable for short- to medium-range optical links, and the compact module reduces space requirements in dense rack environments. Built to industry form-factor specifications, the unit simplifies upgrades of existing fiber networks without requiring changes to cabling infrastructure.

Suitable for

• 10 Gbps uplinks between switches and aggregation devices
• High-speed server connections and data center cross-connects
• Fiber backbone links in enterprise and campus networks
• Connecting compatible routers, firewalls, and media converters

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 1310 nm
• Form factor: compact SFP+ transceiver module

How to use

Install the BlueOptics 45W2420 by inserting the SFP+ module into a compatible SFP+ port until it clicks into place. Connect the appropriate fiber optic cable to the module’s connector, observing correct connector type and ensuring clean, undamaged fiber ends. After physical installation, verify link status on the network device and configure interface settings if required by your equipment. For hot-plug operations, follow your device manufacturer’s guidelines to avoid link flapping during insertion or removal.

Recommendations

Use factory-terminated or professionally cleaned fiber cables and confirm optical power budgets match your link distance and transceiver sensitivity. Maintain firmware and driver compatibility with your network devices and avoid exposing the optical port to dust or direct sunlight when not connected. Replace the dust cap when the module is unused.