SFP-lähetin-vastaanotin BlueOptics 770-312-BO 1250 Mbit/s kuitu

The BlueOptics 770-312-BO 1250 Mbit/s Fiber optic SFP transceiver is a compact module for single-port network equipment requiring fiber connectivity. Designed in an SFP form factor, this silver-coloured transceiver supports a maximum data transfer rate of 1250 Mbit/s and is intended for use in fiber optic links. The module is lightweight (approximately 20 g) and rated with a high mean time between failures (MTBF) of 1,000,000 hours. Compliance with CE, FCC and RoHS standards ensures it meets common regulatory and safety requirements for deployment in commercial and industrial network environments.

Advantages

The SFP form factor provides compatibility with a wide range of switches, routers and media converters that accept industry-standard SFP modules. A maximum data rate of 1250 Mbit/s supports standard fiber-based Ethernet links and similar serial optical interfaces. The module’s high MTBF indicates long operational life, and its lightweight, compact design simplifies installation in dense networking racks where space and weight are considerations. Silver finish aids visual identification in mixed-module installations.

Suitable for

• Single-mode or multimode fiber links (where supported by the link components)
• Edge switches, core switches and routers with SFP ports
• Media converters and small-form-factor network appliances
• Replacement of existing SFP transceivers for matching speed and form factor

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 1250 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Power down the host device or follow the hot-swap procedure recommended by the equipment manufacturer before inserting or removing the SFP transceiver. Align the transceiver with the SFP port and slide it in until it locks in place; secure any retention mechanism if present. Connect the appropriate fiber optic cable, observing correct connector type and polarity for the network. Configure the host device interface for the required speed and optical settings if necessary, then verify link status and network parameters via the device management interface.

Recommendations

Verify compatibility between the transceiver’s optical characteristics and the fiber cabling and partner modules in the link. Use dust caps when the transceiver is not connected to protect the optical interface. Follow manufacturer guidance for ESD precautions and operating temperature ranges to ensure reliable operation.