SFP-lähetin-vastaanotin BlueOptics AFCT-5760TLZ-BO 155 Mbit/s

The BlueOptics AFCT-5760TLZ-BO SFP transceiver is a compact fiber optic module designed for 155 Mbit/s data transmission over multimode fiber. Housed in an aluminium body and weighing 20 g, this SFP module implements an LC duplex connection and follows MSA standards to ensure physical compatibility with standard SFP ports. The transceiver supports simultaneous transmit and receive operation with 1310 nm optics and is intended for reliable use in networking equipment that accepts SFP form-factor modules.

Advantages

This SFP transceiver provides a standardized SFP interface with a maximum data transfer rate of 155 Mbit/s in a lightweight aluminium package. It is manufactured to MSA-compliant dimensions for plug-and-play insertion into compatible SFP slots and is assembled using tested components to provide stable optical performance and long operational lifetime. The LC duplex connector supports separate transmit and receive fibers to maintain bidirectional fiber links.

Suitable for

• 100BASE-FX and similar fiber Ethernet links up to 155 Mbit/s
• Connections between switches, routers and storage systems using SFP ports
• Short to medium multimode fiber links where 1310 nm optics are appropriate

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Optical wavelength: 1310 nm (transmit and receive)
• Connector type: LC duplex
• Fiber type: multimode fiber compatibility
• Housing material: aluminium
• Weight: 0.02 kg

How to use

Insert the BlueOptics AFCT-5760TLZ-BO into an available SFP slot on compatible networking equipment while the device is powered down or in accordance with the host vendor's hot-plug guidelines. Terminate the LC duplex connector to the multimode fiber patch cord, ensuring correct TX-to-RX alignment between both ends. Configure the host port for the required Ethernet or optical protocol and verify link status and data rate through the device management interface.

Recommendations

For stable operation, use quality multimode LC duplex patch cords, verify that the host hardware supports the required optical wavelength and SFP transceiver type, and check for DDM/DOM support on the host if remote diagnostics are needed. Follow industry-standard cleaning procedures for fiber connectors and verify link integrity after installation.