SFP+-lähetin-vastaanotin BlueOptics CPAC-TR-10SR-B 10000 Mbit/s 850 nm

The BlueOptics CPAC-TR-10SR-B is an SFP+ transceiver module engineered for 10 Gbit/s short-range multimode fiber links. It operates at an 850 nm wavelength and supports data transmission up to 300 meters under suitable multimode fiber conditions. The compact, lightweight silver module installs into SFP+ slots on switches, routers or server NICs to provide a hot-pluggable optical connection for high-speed networks.

Advantages

This SFP+ transceiver provides a standardized physical interface and supports 10 000 Mbit/s throughput, enabling reliable short-range optical connectivity. Its 850 nm VCSEL-based design and compact SFP+ form factor deliver low power consumption and simple integration into existing network equipment. The lightweight silver housing helps reduce port load while maintaining mechanical compatibility with SFP+ cages.

Suitable for

• Short-range 10 Gbit/s connections over multimode fiber (up to 300 m)
• Data center top-of-rack and aggregation switches
• Server network interface cards with SFP+ ports
• Enterprise LAN links and high-performance computing clusters

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Wavelength: 850 nm
• Maximum reach (typical, multimode): up to 300 m
• Form factor: SFP+ hot-pluggable transceiver
• Weight: 0.02 kg
• Colour: Silver

How to use

Insert the BlueOptics CPAC-TR-10SR-B into an available SFP+ slot until it seats firmly and the retention latch engages. Connect the appropriate multimode fiber patch cable with matching duplex LC connectors and ensure the connected equipment is configured for 10 Gbit/s operation. Verify link status through the host device’s management interface and monitor optical signal parameters where supported. The module is hot-pluggable, but observe standard ESD precautions when handling.

Recommendations

Use multimode fiber of the correct grade (for example OM3/OM4 as appropriate) and duplex LC patch cords to achieve the specified 300 m reach at 850 nm. Keep fiber connectors clean and avoid excessive bending of fiber cables. Ensure device compatibility with SFP+ modules and confirm proper transmit/receive orientation when connecting duplex links.