Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm

SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
39,11 €
The BlueOptics EX-SFP-1GE-LX-BO is a single-mode SFP fiber optic transceiver designed for 1.25 Gbit/s applications using a 1310 nm wavelength. It supports the SFP interface and fits devices with MSA-compliant SFP ports. The module has an LC duplex optical connector, a compact silver housing and a li... Lue lisää
Varasto 1063 Tuotekoodi 1473700 Merkki BLUEOPTICS Malli EX-SFP-1GE-LX-BO Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika keskiviikko 4. marraskuuta
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

The BlueOptics EX-SFP-1GE-LX-BO is a single-mode SFP fiber optic transceiver designed for 1.25 Gbit/s applications using a 1310 nm wavelength. It supports the SFP interface and fits devices with MSA-compliant SFP ports. The module has an LC duplex optical connector, a compact silver housing and a lightweight construction (approx. 20 g). It is intended for reliable optical links in switches, routers and other network equipment that accept 1000BASE-LX SFP modules.

Advantages

The transceiver provides a standardized SFP form factor for easy hot-plug installation and interchangeability across MSA-compliant platforms. With a 1310 nm transmitter/receiver pair it enables single-mode fiber links up to typical LX distances and supports Ethernet and related high-speed applications up to 1.25 Gbit/s. The module meets common regulatory standards (RoHS, CE, FCC) and is specified with a high MTBF, indicating long operational lifetime and reduced maintenance demands.

Suitable for

Key specifications

How to use

Install the BlueOptics EX-SFP-1GE-LX-BO into any compatible MSA SFP slot with the device powered on or off according to the host equipment documentation. Connect an LC duplex single-mode fiber patch cable to the transceiver, ensuring correct transmit/receive orientation. Configure the host interface for the intended protocol (for example 1000BASE-LX Ethernet) and verify link status through the switch or router management interface. If the host supports Digital Diagnostic Monitoring (DDM/DOM), enable and monitor available parameters such as optical power, temperature and supply voltage for proactive maintenance.

Recommendations

For best performance, use single-mode fiber and quality LC duplex patch cords rated for 1310 nm. Verify that the host device permits third-party SFP modules and, if DDM/DOM is required, ensure the host supports this feature. Perform link tests and monitor optical levels after installation to confirm margin and expected reach.

Tärkeimmät ominaisuudet
  • 1 Gbit/s Ethernet uplinks over single-mode fiber
  • Interconnects between switches, routers, and storage systems
  • Longer-distance LAN and campus links where 1310 nm single-mode optics are required
  • Replacement or upgrade of MSA-compliant 1000BASE-LX SFP ports
  • Interface type: SFP (MSA-compliant)
  • Maximum data rate: 12500 Mbit/s (1.25 Gbit/s line rate capability)
  • Wavelength: 1310 nm (single-mode fiber)
  • Connector: LC duplex optical connector
  • Typical reach: LX-class single-mode distances (up to several kilometers depending on fiber and link conditions)
  • Product colour: Silver
  • Weight: 0.02 kg
  • MTBF: 1,000,000 hours
  • Regulatory compliance: RoHS, CE, FCC
Tekniset tiedot
Aallonpituus
1310 nm
Alin käyttölämpötila
0 °C
Keskimääräinen vikaantumisväli (MTBF)
1000000 h
Kuitukaapelointitekniikka
1000BASE
Kuituliitin
SFP
Liitäntätyyppi
SFP
Monimuotokuitu (MMF) tuettu
No
Paino
0.02 kg
Pakkauksen paino
30 g
Sertifiointi
RoHS, CE, FCC
SFP-lähetinvastaanottimen tyyppi
Fiber optic
Suurin siirtoetäisyys
10000 m
Suurin tiedonsiirtonopeus
12500 Mbit/s
Tuotteen väri
Silver
Vaatimustenmukaisuustodistukset
RoHS
Yksimuotokuitu (SMF) tuettu
Yes
Ylin käyttölämpötila
70 °C
Hintahistoria viimeisen 6 kuukauden ajalta
SFP-lähetin-vastaanotin BlueOptics EX-SFP-1GE-LX-BO 12500 Mbit/s 1310 nm
Nykyinen
39,11 €
Alin
38,43 €
Ylin
54,74 €
Muutos 24 h
+0,57 €   +1%
Viikko
+0,50 €   +1%
Kuukausi
+0,24 €   +1%

Kirjoita arvostelu

Arvosana *
Nimesi näytetään julkisesti – voit käyttää nimimerkkiä. Kutsumme ostajia kirjoittamaan arvosteluja; tarkistamme arvostelut ennen julkaisua ja julkaisemme myös kriittiset.

Suositut tuotteet tässä kategoriassa

Myyjä: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.
Kaikki kategoriat