SFP-lähetin-vastaanotin BlueOptics NTTP06CFE6 1250 Mbit/s 1310 nm hopea

The BlueOptics NTTP06CFE6 1250 Mbit/s 1310 nm Silver is a compact SFP fiber optic transceiver module designed for single-port network interfaces. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm, providing standard-rate optical connectivity for switches, routers and media converters where small form-factor pluggable modules are required. The module is lightweight (20 g) and finished in silver, suitable for installations requiring standardized SFP modules with predictable mechanical and optical characteristics.

Advantages

This SFP transceiver offers compatibility with devices that accept SFP form factor modules and a stable optical link at 1310 nm for typical multimode or singlemode applications depending on system design. Its 1250 Mbit/s rate supports common network protocols and legacy optical links. The compact SFP form factor enables hot-pluggable installation and removal without powering down the host device, simplifying maintenance and upgrades.

Suitable for

Key specifications

How to use

Insert the BlueOptics SFP transceiver into an empty SFP slot on a compatible switch, router or media converter until it clicks into place. Connect the appropriate fiber optic cable and secure any external connectors. Verify the link status on the host device and configure interface settings such as speed and duplex if required by the network equipment. To remove the module, power down the link if recommended by equipment guidelines or use the hot-swap procedure of the host device, then release and extract the module carefully.

Recommendations

Use the transceiver with compatible SFP ports and fiber cabling rated for the intended wavelength and distance. Avoid exposing the optical connectors to dust; keep protective caps on unused ports and clean connectors before mating. Store and handle the module in static-safe conditions and follow the host equipment manufacturer’s guidelines for SFP compatibility and firmware requirements.