SFP-lähetin-vastaanotin BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s

The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transceiver supports high-speed optical transmission over appropriate fiber types and is specified with a long mean time between failures (MTBF) to support continuous operation in network equipment.

Advantages

This SFP+ transceiver delivers 10 Gbit/s data transfer capacity in a compact, silver metal housing and is compatible with standard SFP+ interfaces. Its MSA-conformant design ensures mechanical and electrical interoperability with a wide range of network switches, routers and storage systems that accept SFP+ modules. The unit’s high MTBF provides a measure of long-term reliability for installations that require extended uptime.

Suitable for

Key specifications

How to use

Install the transceiver into an available SFP+ port on compatible network equipment until it latches. Connect the appropriate LC fiber patch cable (single-mode or multimode as required by the link and device support) to the module’s optical interface, observing correct transmit/receive orientation. Configure the host device for a 10 Gbit/s link and verify link status and diagnostics through the system management interface. Power down the host device only if required by the vendor; otherwise hot-plug insertion and removal are supported by SFP+ ports that allow hot-swap operation.

Recommendations

Ensure the transceiver is used in equipment that supports SFP+ modules and the intended optical wavelength and fiber type. Use quality LC duplex patch cords and follow manufacturer guidelines for connector cleaning and handling to maintain link performance. If digital diagnostic monitoring (DDM/DOM) is required, confirm that the host hardware provides DDM support to access real-time module parameters.