Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm

SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
77,17 €
The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is... Lue lisää
Varasto 18 Tuotekoodi 1485840 Merkki BLUEOPTICS Malli TRPEG1EEXC000E2G-BO Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika Perjantai, Lokakuu 30
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

The BlueOptics TRPEG1EEXC000E2G-BO is an SFP transceiver module for single‑mode fiber networks. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. Housed in a durable metal casing and weighing approximately 20 g, the module requires a 3.3 V supply and is designed to fit standard SFP ports using an LC duplex optical interface. The transceiver supports link reach up to 40,000 m over appropriate single‑mode fiber.

Advantages

The module follows MSA‑compatible SFP form‑factor standards to ensure mechanical and electrical interoperability with compatible network equipment. A compact metal enclosure provides mechanical protection and thermal stability. With support for 1310 nm optical transmission and a rated maximum distance of 40 km, the transceiver is suitable for long‑reach Ethernet and related optical protocols. Low weight and a standard 3.3 V interface simplify installation and replacement in switches, routers and media converters.

Suitable for

Key specifications

How to use

Power down or follow hot‑swap procedures recommended by your hardware vendor before inserting the SFP module into an SFP cage. Insert the transceiver into an empty SFP slot until it latches, then connect LC duplex patch cords to the transmit and receive ports, observing correct fiber polarity. Configure the host device for the intended optical link speed and protocol (up to 1250 Mbit/s) and verify link status through the device management interface. If the host supports digital diagnostic monitoring (DDM/DOM), enable or query the DDM functions to read real‑time parameters where available.

Recommendations

Use single‑mode LC duplex fiber and compatible patch cords for best range and signal quality. Verify compatibility with the target switch or router model and ensure the host firmware accepts third‑party SFP modules if required. Keep optical connectors clean and capped when not in use; follow ESD precautions when handling the transceiver.

Tärkeimmät ominaisuudet
  • Single‑mode fiber links up to 40 km (1000BASE‑LH style applications)
  • Gigabit Ethernet and other 1.25 Gbit/s optical interfaces
  • Installation in switches, routers, media converters and compatible SFP slots
  • Point‑to‑point backbone connections and campus interconnects
  • Maximum data rate: 1250 Mbit/s
  • Wavelength: 1310 nm
  • Maximum transfer distance: 40,000 m (40 km) over single‑mode fiber
  • Optical connector type: LC duplex (SFP form factor)
  • Supply voltage: 3.3 V
  • Product colour / finish: silver metal housing
  • Weight: approx. 0.02 kg
Tekniset tiedot
Aallonpituus
1310 nm
Duplex-järjestelmä
Full
Käyttölämpötila (T-T)
0 - 70
Kuitukaapelointitekniikka
1000BASE
Kuituliitin
SFP
Liitäntätyyppi
SFP
Paino
0.02 kg
Pakkauksen paino
30 g
Rungon materiaali
Metal
Rx-aallonpituus (maks.)
1310 nm
Säilytyslämpötila (T-T)
0 - 90
SFP-lähetinvastaanottimen standardi
LH
SFP-lähetinvastaanottimen tyyppi
Fiber optic
Suurin siirtoetäisyys
40000 m
Suurin tiedonsiirtonopeus
1250 Mbit/s
Tulojännite
3.3
Tuotteen väri
Silver
Tuotteiden määrä pakkauksessa
1 pc(s)
Tx-aallonpituus (maks.)
1310 nm
Ylin käyttölämpötila
70 °C
Hintahistoria viimeisen 6 kuukauden ajalta
SFP-lähetin-vastaanotin BlueOptics TRPEG1EEXC000E2G-BO 1250 Mbit/s 1310 nm
Nykyinen
77,17 €
Alin
75,33 €
Ylin
80,57 €
Muutos 24 h
+0,60 €   +1%
Viikko
+0,23 €   +0%
Kuukausi
+1,84 €   +2%

Suositut tuotteet tässä kategoriassa

Myyjä: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilna, Liettua · Yritystunnus 303192950 · ALV-numero LT100008198612 · Toimitus EU:sta (Liettua)
Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.