SFP-lähetin-vastaanotin BlueOptics TRX100041-BO kuitu 155 Mbit/s

The BlueOptics TRX100041-BO SFP transceiver is a fiber optic module designed for single-mode optical links with a maximum data transfer rate of 155 Mbit/s. Housed in an aluminium body and weighing approximately 20 g, this compact SFP form-factor transceiver supports LC duplex connections and is intended for use in SFP-compatible network equipment that accepts MSA-compliant modules.

Advantages

The transceiver provides stable optical data transmission over single-mode fiber, with a defined 155 Mbit/s transfer rate suitable for legacy and specialized network services. Its aluminium housing offers durable physical protection while keeping weight low for easy handling and installation. Built to MSA mechanical and electrical specifications, it is compatible with a wide range of SFP-capable switches, routers and network appliances that accept SFP modules.

Suitable for

• 100BASE-LX / 155 Mbit/s single-mode fiber links
• Interconnection between switches, routers and storage systems
• Network segments requiring LC duplex fiber connectors
• Environments where compact SFP modules are required for modular optics

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Optical fiber type: single-mode (LC duplex connector)
• Housing material / colour: aluminium / aluminium
• Weight: 0.02 kg
• Typical transmission reach: up to 10 km (single-mode, protocol dependent)

How to use

Insert the BlueOptics TRX100041-BO into an available SFP slot on a compatible network device while the device is powered according to the equipment manufacturer's instructions. Connect LC duplex single-mode fiber patch cords to the module's connector, ensuring correct transmit/receive orientation. After installation, verify the link status in the host device and configure the network interface as required by your network protocols. If the host supports digital diagnostics (DDM/DOM), enable or read diagnostic parameters through the device management interface to monitor voltage, optical power and temperature where supported.

Recommendations

To achieve optimal performance, use single-mode LC duplex patch cords and maintain clean connector endfaces. Verify that the target hardware officially supports MSA-compliant third-party SFP modules. For fiber runs approaching the maximum reach, check link budgets and attenuation. Handle the module by its housing to avoid touching optical interfaces and store unused modules with dust caps fitted.