Tili Ota yhteyttä
Ostoskorisi
Toimitus DPD & FedEx
Tarvitsetko apua? Kysy AI:lta

SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s

SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
65,87 €
The BlueOptics RDH 102 48/2-BO SFP transceiver module is a compact single‑port optical transceiver designed for fiber optic connections with a maximum data transfer rate of 1250 Mbit/s. Housed in a silver casing and weighing approximately 20 g, this SFP module follows MSA-compliant SFP form factor s... Lue lisää
Varasto 38 Tuotekoodi 1478104 Merkki BLUEOPTICS Malli RDH 102 48/2-BO Takuu 2 vuotta

Toimitus ja palautukset

Arvioitu toimitusaika Tiistai, Lokakuu 27
Saat päivitykset yksityiskohtaisen seurantajärjestelmän kautta
Maksuvaihtoehdot
MaksukorttiVisaMastercardPayPalApple PayGoogle PayTilisiirto

The BlueOptics RDH 102 48/2-BO SFP transceiver module is a compact single‑port optical transceiver designed for fiber optic connections with a maximum data transfer rate of 1250 Mbit/s. Housed in a silver casing and weighing approximately 20 g, this SFP module follows MSA-compliant SFP form factor standards and meets CE, RoHS and FCC requirements. It is intended for use in network equipment that supports 1000BASE-BX-D type single-mode fiber links with LC simplex connection.

Advantages

The module provides a standardized SFP interface for straightforward hot‑pluggable integration into switches, routers and other networking devices. Its single‑mode operation with distinct transmit and receive wavelengths supports long-reach optical links up to typical 20 km distances for compatible 1000BASE-BX-D deployments. Compliance with international safety and environmental directives ensures predictable interoperability and regulatory conformity in enterprise and carrier environments.

Suitable for

Key specifications

How to use

Install the SFP transceiver into an appropriate SFP port while the host device is powered on or off according to the equipment vendor's guidelines; the SFP form factor supports hot‑swap operation. Connect an LC simplex single‑mode patch cable between the module and the remote transceiver, observing the correct transmit/receive alignment for 1000BASE‑BX‑D links. Verify link status and speed via the host device management interface. If supported by the host, enable and monitor digital diagnostics (DDM/DOM) to view real‑time operational parameters such as optical power and temperature.

Recommendations

For reliable long‑term operation, use high-quality single‑mode LC patch cords and compatible SFP ports from the equipment vendor. Ensure that the host hardware supports 1000BASE‑BX‑D transceivers and, if needed, DDM/DOM functionality to enable remote diagnostics. Follow ESD handling precautions when inserting or removing the module.

Tärkeimmät ominaisuudet
  • Single-mode fiber uplinks between switches and routers
  • Point-to-point optical links in campus or metropolitan networks
  • Replacement or expansion modules in equipment that supports 1000BASE-BX-D SFPs
  • Environments requiring CE, RoHS and FCC compliant transceivers
  • Interface type: SFP (hot‑pluggable)
  • Maximum data transfer rate: 1250 Mbit/s
  • Fiber type: Single-mode fiber (SMF)
  • Connector type: LC simplex
  • Typical reach: up to 20 km for 1000BASE-BX-D applications (device- and link-dependent)
  • Weight: approx. 0.02 kg
  • Product colour: Silver
  • Compliance: CE, RoHS, FCC
Tekniset tiedot
Käyttölämpötila (T-T)
0 - 70
Kestävän kehityksen vaatimustenmukaisuus
Yes
Kuitukaapelointitekniikka
1000BASE
Kuituliitin
LC
Lähetysaallonpituus (min.)
1550 nm
Liitäntätyyppi
SFP
Määrä pakkauksessa
1 pc(s)
Paino
0.02 kg
Pakkauksen paino
30 g
Rx-aallonpituus (maks.)
1310 nm
SFP-lähetinvastaanottimen tyyppi
Fiber optic
Suurin siirtoetäisyys
20000 m
Suurin tiedonsiirtonopeus
1250 Mbit/s
Tuotteen väri
Silver
Tx-aallonpituus (maks.)
1550 nm
Vaatimustenmukaisuustodistukset
Federal Communications Commission (FCC), RoHS, CE
Vastaanottoaallonpituus (min.)
1310 nm
Yksimuotokuitu (SMF) tuettu
Yes

Asiakirja

Avaa asiakirja

Asiakirja

Avaa asiakirja
Hintahistoria viimeisen 6 kuukauden ajalta
SFP-lähetin-vastaanotin-moduuli BlueOptics RDH 102 48/2-BO 1250 Mbit/s
Nykyinen
65,87 €
Alin
65,12 €
Ylin
71,41 €
Muutos 24 h
+0,41 €   +1%
Viikko
-0,15 €   0%
Kuukausi
+0,18 €   +0%

Suositut tuotteet tässä kategoriassa

Hei, olen DistriNoden tekoälyavustaja. Autan sinua löytämään tuotteita, vertailemaan vaihtoehtoja, laatimaan tarjouksia PDF-muodossa tai tekemään tukipyyntöjä.