SFP-lähetin-vastaanotinmoduuli BlueOptics 02317346-BO 1250 Mbit/s kuitu

The BlueOptics 02317346-BO is an SFP fiber optic transceiver module designed for point-to-point and edge networking applications. With a compact SFP form factor and a maximum data transfer rate of 1250 Mbit/s, this module supports standard fiber links and is compatible with Huawei devices. Specifications such as a mean time between failures (MTBF) of 1,000,000 hours and certifications including CE, FCC and RoHS indicate stable operation and regulatory compliance for professional network installations.

Advantages

The module’s SFP form factor offers space-efficient installation in compatible switches and routers. A rated data transfer rate of 1250 Mbit/s meets common Gigabit and legacy Fiber Channel interfacing requirements where that throughput is applicable. An MTBF of 1,000,000 hours provides an indicator of long-term reliability, while CE, FCC and RoHS compliance ensures adherence to safety, electromagnetic and environmental standards.

Suitable for

• Small and medium enterprise fiber uplinks
• Edge switches and routers with SFP ports
• Replacement modules in Huawei-compatible equipment
• Short- to medium-distance single-mode or multimode fiber connections (verify fiber type before installation)

Key specifications

• Interface type: SFP form factor
• Maximum data transfer rate: 1250 Mbit/s
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Certifications: CE, FCC, RoHS
• Weight: 0.02 kg

How to use

Verify that the target device supports SFP modules and is compatible with the BlueOptics 02317346-BO. Power down the network device or follow hot-swap procedures recommended by the device manufacturer. Insert the transceiver into an empty SFP slot until it seats securely. Connect an appropriate fiber optic cable and ensure correct transmit/receive orientation. After installation, check link status and data rate on the host device and confirm proper operation using the device’s management interface.

Recommendations

Store and handle the transceiver in a dry, dust-free environment. Use dust caps on unused ports and avoid touching fiber endfaces. Confirm fiber type and connector compatibility before deployment and consult the host device documentation for any vendor-specific settings or firmware requirements.