SFP+-lähetin-vastaanotinmoduuli BlueOptics 10-2618-01-BO 10000 Mbit/s

The BlueOptics 10-2618-01-BO is an SFP+ fiber optic transceiver module designed to support data links up to 10,000 Mbit/s. With a compact SFP+ form factor and a silver finish, the module is suitable for installation in compatible switches, routers and server network interfaces where high-speed optical connectivity is required. The unit complies with CE, FCC and RoHS standards and is specified with a mean time between failures (MTBF) of 1,000,000 hours, reflecting its design for continuous operation in professional network environments.

Advantages

The module provides a standard SFP+ interface for easy hot-plug installation and interoperability with equipment that supports SFP+ optics. Its 10,000 Mbit/s capability enables use in 10 Gigabit Ethernet links or other high-speed optical applications. Its small, lightweight silver housing (about 20 g) reduces space and weight demands in dense rack installations. Compliance with CE, FCC and RoHS ensures regulatory conformity and reduced environmental hazard from hazardous substances.

Suitable for

• 10 Gigabit Ethernet uplinks between switches and routers
• High-speed server connections in data centers
• Optical fiber links in enterprise campus networks
• Replacement or spare module for SFP+ compatible network equipment

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Interface type: SFP+
• Product colour: Silver
• Weight: 0.02 kg
• Operational reliability: MTBF 1,000,000 hours
• Compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ transceiver into an SFP+ slot on a compatible network device following the device manufacturer's instructions. Ensure the transceiver is fully seated and locked before connecting fiber optic cables. Use matching fiber connectors and appropriate patch cords for the intended multimode or singlemode link type as specified by the network design. After connection, verify link status and configure the device port for the desired speed and duplex settings if required by the host equipment.

Recommendations

Handle the module by its housing, avoid touching the optical connector end-face, and keep dust caps in place when not connected. Ensure compatible transceiver coding and firmware acceptance on the host device to avoid interoperability issues. For optimal performance, follow recommended fiber type, connector cleaning procedures and ambient operating condition limits specified by the network equipment vendor.