SFP-lähetin-vastaanotinmoduuli BlueOptics 10G-SFP-LR-BO kuitu 10000 Mbit/s

The BlueOptics 10G-SFP-LR-BO is a fiber optic SFP+ transceiver module designed for 10 Gbit/s single-mode links. It supports a maximum data transfer rate of 10000 Mbit/s and is intended for installation in SFP+ ports on switches, routers or network interface cards. The module is compact and lightweight with a silver housing and an MTBF of approximately 1,000,000 hours, meeting CE, FCC and RoHS compliance for use in professional network environments.

Advantages

This SFP transceiver provides a standardized SFP+ form factor compatible with a wide range of networking equipment and supports 10 Gbit/s throughput for high-bandwidth connections. The small 20 g metal housing facilitates easy handling and installation while offering mechanical stability. Compliance with CE, FCC and RoHS ensures it meets common regulatory and safety requirements for commercial deployments.

Suitable for

• 10 Gbit/s single-mode fiber uplinks between switches and routers
• High-speed server connections and data center interconnects
• Long-reach fiber segments in campus and enterprise networks
• Network equipment upgrades to SFP+ ports

Key specifications

• Form factor: SFP+ compatible transceiver
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Interface type: SFP+
• Transmission medium: single-mode fiber (optical)
• Product colour: silver metal housing
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Insert the BlueOptics 10G-SFP-LR-BO into an empty SFP+ port of a compatible switch, router or server network card until it latches. Connect appropriate single-mode fiber cables to the transceiver’s optical connector, observing correct transmit and receive orientation. After physical installation, verify link status and configure network interface settings on your equipment as required to enable 10 Gbit/s operation. Follow the host device documentation for any platform-specific compatibility or firmware settings.

Recommendations

Use single-mode fiber and connectors that match the transceiver’s optical specifications and maintain proper cleanliness of fiber endfaces. Confirm compatibility with your network hardware vendor if hot-plug behavior or vendor locking is a concern. Store and handle the module in dry, electrostatic-safe conditions and avoid excessive force when inserting or removing the transceiver.