SFP+-lähetin-vastaanotinmoduuli BlueOptics 10GB-T-SFPP-BO kupari 10000 Mbit/s

The BlueOptics 10GB-T-SFPP-BO Copper 10000 Mbit/s is an SFP+ copper transceiver module designed for 10 Gigabit Ethernet links over twisted-pair copper cabling. Housed in a compact SFP+ form factor with a silver finish, this module provides a practical option for short-range, cost-efficient network connectivity where copper infrastructure is preferred. The module is manufactured to meet CE, FCC and RoHS standards and has a mean time between failures (MTBF) of 1,000,000 hours, indicating a design focused on durability and stable operation.

Advantages

The module supports a 10 Gbit/s maximum data transfer rate while using the familiar RJ-45 copper interface via the SFP+ cage, enabling flexible deployment in switches, routers or servers that accept SFP+ copper modules. Its compact SFP+ form factor conserves space in high-density networking equipment. Compliance with CE, FCC and RoHS standards ensures regulatory conformity and reduced environmental impact. The stated MTBF gives an indication of long-term reliability for continuous operation.

Suitable for

• 10 Gigabit Ethernet connections over copper for short to moderate distances
• High-density switch or server slots requiring SFP+ form-factor modules
• Environments where reuse of existing copper cabling is preferred over fiber
• Network upgrades that demand backward compatibility with copper infrastructure

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ copper transceiver
• Weight: 0.02 kg
• Colour: Silver
• Standards conformity: CE, FCC, RoHS
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on a switch, router or server until it clicks into place. Connect the module to the copper network using suitable Cat6a or better twisted-pair cabling and RJ-45 termination to achieve 10 Gbit/s link rates where supported by the host device. Ensure the host device firmware and interface settings are configured for 10G operation and allow the device to negotiate link parameters automatically. Remove the module by pressing the release mechanism on the SFP+ cage and pulling the module straight out when safe to do so.

Recommendations

Use certified Cat6a (or higher) copper cabling and proper shielding for reliable 10 Gbit/s performance. Verify compatibility with the host device’s SFP+ port and check for any required firmware or driver updates. Avoid exposure to extreme temperatures, moisture, or electrostatic discharge during installation and handling.