SFP-lähetin-vastaanotinmoduuli BlueOptics 10GB-ZR-SFPP-BO 10000 Mbit/s hopea

The BlueOptics 10GB-ZR-SFPP-BO is a compact SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. Housed in a silver metal enclosure and weighing approximately 0.02 kg, the module supports high-speed optical transmission over long distances when used with compatible single-mode fiber and appropriate optical interfaces. Built to industry conformity standards, it offers an expected MTBF of around 1,000,000 hours and is suitable for installation in switches, routers and media converters that accept SFP+ form-factor transceivers.

Advantages

The module supports a 10,000 Mbit/s data rate in an SFP+ form factor, allowing integration into systems that require compact, hot-pluggable optical interfaces. Its silver metal housing provides mechanical robustness and thermal dissipation, while compliance with CE, FCC and RoHS standards ensures regulatory and environmental compatibility. The stated mean time between failures indicates long operational life under normal conditions.

Suitable for

• 10 Gbit/s single-mode fiber links in data centers
• High-speed uplinks between switches and routers
• Long-distance optical connections where SFP+ ZR-class optics are required
• Replacement or upgrades in equipment that supports SFP+ transceivers

Key specifications

• Form factor: SFP+ (compact, hot-pluggable)
• Maximum data transfer rate: 10,000 Mbit/s
• Optical class: ZR-class long-reach single-mode optics (intended use)
• Typical weight: 0.02 kg
• Housing: metal, silver finish
• Standards compliance: CE, FCC, RoHS
• Reliability: Mean time between failures ~1,000,000 hours

How to use

Verify that the target device accepts SFP+ transceivers and that the optical link requirements (fiber type, connector, and distance) match the module's intended ZR-class long-reach single-mode operation. Insert the module into an available SFP+ port until it seats and latches; most devices detect the module automatically. Connect the appropriate single-mode fiber patch cable to the module's optical port, ensuring clean connectors and proper polarity. Configure the network device interface if necessary (speed/duplex, administrative state, or optical diagnostics) and monitor link status through the device management interface.

Recommendations

To maintain performance and longevity, handle the transceiver by its body, avoid touching the optical surfaces, and use dust caps when the module is not connected. Ensure fiber connectors are cleaned before mating. Confirm compatibility with your equipment vendor's supported transceiver list to avoid interoperability issues. Operate the module within the host device's specified temperature and power budgets.