SFP-lähetin-vastaanotinmoduuli BlueOptics 1184561P1-BO 125 Mbit/s

The BlueOptics 1184561P1-BO SFP transceiver module is a compact fiber-optic module designed for SFP ports. It supports a maximum data transfer rate of 125 Mbit/s, has an aluminium-coloured metal body and weighs approximately 20 g, making it lightweight and easy to handle. The module is intended for use in network equipment that supports SFP modules and provides a standard optical interface for short- and long-distance fiber connections when used with appropriate fiber cabling.

Advantages

The module's small SFP form factor and lightweight aluminium-coloured housing simplify installation and reduce space requirements in switches, routers or other network appliances. Rated for a maximum data rate of 125 Mbit/s, it offers a stable optical interface for compatible equipment and standard fiber patch panels. Its metal body provides mechanical robustness and helps with passive heat dissipation during operation.

Suitable for

• Replacing or expanding SFP ports in switches and routers that accept SFP transceivers
• Network links requiring a 125 Mbit/s optical connection
• Connections via LC/appropriate fiber connectors in local and campus networks

Key specifications

• Interface type: SFP form factor for hot-pluggable optical modules
• Maximum data transfer rate: 125 Mbit/s
• Housing: aluminium-coloured metal body
• Weight: approximately 0.02 kg

How to use

Power down or follow hot-swap procedures as specified by your network equipment vendor, then insert the SFP transceiver into an available SFP port until it clicks into place. Connect the appropriate single-mode or multi-mode fiber patch cable (matching the transceiver’s connector type) to the module and to the remote device. Configure the host device's interface settings to the required speed and protocol supported by the equipment. Observe device vendor guidelines for link negotiation and any required firmware or compatibility settings.

Recommendations

Verify physical connector compatibility and fiber type before installation. Use dust caps when the module is not connected and avoid excessive bending of fiber cables. Confirm that the host device supports SFP modules with the intended data rate, and follow your equipment manufacturer's guidance for hot-plugging and firmware compatibility to ensure reliable operation.