SFP+-lähetin-vastaanotinmoduuli BlueOptics 3FE65608AA-BO 10000 Mbit/s

The BlueOptics 3FE65608AA-BO SFP+ transceiver module delivers a 10 Gbit/s optical link in a compact, metal-housed SFP+ form factor. Designed for multimode fiber applications with LC duplex connections, this module supports high-speed data transfer up to 10000 Mbit/s while offering a low weight of 20 g and a quoted mean time between failures (MTBF) of 1,000,000 hours. The silver-coloured module follows MSA-compliant electrical and mechanical specifications and is intended for use in network equipment that accepts SFP+ pluggable optics.

Advantages

The transceiver provides a standardized SFP+ interface for straightforward insertion into compatible switches, routers and storage hardware. A robust metal housing contributes to mechanical durability and thermal stability during operation. The module’s multimode fibre optic design and LC duplex connector enable simultaneous transmit and receive channels over a single connector pair. Digital diagnostic monitoring (DDM/DOM) capability is supported where host hardware exposes those functions, allowing real-time monitoring of key operating parameters.

Suitable for

• 10 Gbit/s Ethernet links over multimode fiber
• High-speed connections between switches, routers and storage systems
• Data center patching and short-range fiber backbone links (multi-mode)

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Connector type: LC duplex (multimode fiber)
• Form factor: SFP+ metal housing
• Weight: 0.02 kg
• Product colour: Silver
• MTBF: 1,000,000 hours

How to use

Install the BlueOptics SFP+ transceiver into an SFP+ slot of compatible network equipment until it clicks into place, then connect LC duplex multimode patch cords to the module. Ensure the host device is configured for a 10 Gbit/s link and that any required software support for third-party modules is enabled in the platform. If the host supports DDM/DOM, monitoring information becomes available through the device management interface for supply voltage, optical power and temperature readings.

Recommendations

Use high-quality multimode fiber patch cords and verify polarity of transmit/receive fibers when connecting LC duplex ends. Operate the module within the manufacturer’s supported temperature and power ranges as specified by your host device, and perform link tests after installation to confirm expected throughput and optical power margins.