SFP-lähetin-vastaanotinmoduuli BlueOptics 3HE00045CA-BO 1250 Mbit/s

The BlueOptics 3HE00045CA-BO SFP transceiver module provides a compact, hot-pluggable solution for fiber optic links with a maximum data transfer rate of 1250 Mbit/s. Housed in a silver SFP form factor, the module is designed for compatibility with a wide range of switches, routers and media converters that accept standard SFP optics. Built to industry safety and environmental standards, the module meets CE, FCC and RoHS requirements and is specified with a mean time between failures (MTBF) of 1,000,000 hours for expected long-term operation.

Advantages

The module’s SFP form factor and silver metallic housing deliver a small footprint and straightforward installation in compatible slots. With support for a 1250 Mbit/s link, it covers common fiber applications such as gigabit-over-fiber link segments and serial optical connections. Compliance with CE, FCC and RoHS ensures regulatory conformity and reduced environmental impact, while the high MTBF rating indicates stable operation over extended service intervals.

Suitable for

• Short- and medium-distance fiber links in enterprise and data center networks
• Media converters and network devices requiring standard SFP optics
• Replacement or expansion of existing fiber ports supporting 1250 Mbit/s

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Product colour: Silver
• Form factor: SFP hot-pluggable module
• Reliability: MTBF 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Ensure the host device supports standard SFP transceivers and the required data rate. With power to the device off or in accordance with the vendor hot-swap guidance, insert the BlueOptics SFP module into an empty SFP slot until it latches. Connect the appropriate fiber patch cable to the module’s optical interface, verify link activity via the host device indicators or management interface, and configure port settings as needed for the network application.

Recommendations

Use compatible single-mode or multimode fiber and connectors as specified by your network design. Store and handle the module with dust caps in place when not connected, avoid excessive mechanical stress on the fiber, and follow the host device manufacturer’s guidelines for hot-plugging and firmware compatibility.