SFP+-lähetin-vastaanotinmoduuli BlueOptics 3HE10452AA-BO 10000 Mbit/s

The BlueOptics 3HE10452AA-BO SFP+ transceiver module is a compact optical interface designed for 10 Gbit/s class network links. It provides a standardized SFP+ connection for use in switches, routers and media converters where a small form-factor pluggable module is required. The module's silver housing and lightweight design make it simple to handle and install, while an MTBF of 1,000,000 hours indicates a design intended for sustained operation in data centre and enterprise network environments.

Advantages

This SFP+ transceiver supports a maximum data transfer rate of 10000 Mbit/s and conforms to the SFP+ interface standard, enabling high-speed optical connectivity with compatible equipment. The module's low weight (0.02 kg) and standard SFP+ form factor simplify deployment and replacement. The silver metal housing offers a durable enclosure for fiber connections and helps with heat dissipation during continuous operation. A high MTBF value provides an indication of reliability for long-term network use.

Suitable for

• 10 Gbit/s uplinks in switches and routers
• Server and storage connectivity in data centres
• Fiber links between distribution and aggregation layers
• Media converters and SFP+ capable network appliances

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Product colour: Silver
• Weight: 0.02 kg
• Designed for small form-factor pluggable slots
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the BlueOptics SFP+ module into a compatible SFP+ slot on the network device until it clicks into place, following the host equipment manufacturer's guidance for safe insertion and removal. Connect appropriate fiber optic cabling with the matching connector type to the module's optical interface, observing correct polarity and connector cleanliness. Verify the link status through the network device's management interface and perform any required configuration for speed, duplex or port settings as defined by the network design.

Recommendations

Ensure fiber connectors are clean before insertion to prevent signal loss and inspect the host device compatibility list for supported SFP+ modules. Use appropriate ESD precautions when handling the transceiver and avoid forcing the module into incompatible slots. For continuous high-throughput links, provide adequate airflow or chassis cooling to maintain operating temperature within device specifications.