SFP-lähetin-vastaanotinmoduuli BlueOptics 551074-BO 155 Mbit/s kuituoptinen

The BlueOptics 551074-BO 155 Mbit/s Fiber optic SFP transceiver module is a compact network interface designed for fiber-optic links requiring a 155 Mbit/s data rate. Housed in a silver SFP form factor, the module provides a small footprint for installation in compatible switches, routers and media converters. Compliance with CE, FCC and RoHS standards and an MTBF of 1,000,000 hours indicate engineered reliability and long service life for typical network deployments.

Advantages

The SFP transceiver offers straightforward integration into SFP-capable ports and supports a fixed 155 Mbit/s transfer rate suitable for legacy SDH/SONET or low-bandwidth Ethernet applications. Its compact SFP form factor simplifies hot-plugging and replacement without adding bulk to rack-mounted equipment. The silver housing and low weight make it unobtrusive in mixed hardware environments, while regulatory compliance ensures it meets common safety and electromagnetic compatibility requirements.

Suitable for

• Point-to-point fiber links at 155 Mbit/s
• Upgrading or replacing SFP ports in switches, routers and media converters
• Industrial or office networks requiring RoHS- and CE-compliant transceivers
• Environments where compact, low-weight optical modules are preferred

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 155 Mbit/s
• Form factor: Small Form-factor Pluggable (SFP)
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Ensure the host device supports SFP modules and that the target port is powered down or supports hot-plug insertion per the device documentation. Insert the BlueOptics 551074-BO into a compatible SFP slot until it seats securely; follow the host equipment instructions to enable the port and configure link parameters at 155 Mbit/s if manual configuration is required. Connect the appropriate fiber optic cable with matching connectors and test the link status using the host device's management interface.

Recommendations

Use fiber patch cables and connectors that match the optical specifications of your network; keep connector end-faces clean to maintain signal quality. Verify compatibility with the host device firmware and perform link tests after installation. For long-term reliability, operate the module within the ambient temperature and handling guidelines of the host equipment.