SFP-lähetin-vastaanotinmoduuli BlueOptics 55110807201-BO 1250 Mbit/s kuituoptinen

The BlueOptics 55110807201-BO is a compact SFP fiber optic transceiver module designed for single-port uplink and short-range fiber connections. Supporting a maximum data transfer rate of 1250 Mbit/s and housed in a silver compact SFP form factor, this module provides a standardized physical interface for installation in compatible network switches, routers and media converters. The device is specified with a high mean time between failures (MTBF) value of 1,000,000 hours and complies with CE, FCC and RoHS safety and environmental standards.

Advantages

This SFP transceiver offers a standardized hot-pluggable SFP interface that simplifies module replacement and upgrades without powering down equipment. Its rated 1250 Mbit/s throughput supports common fiber ethernet and fiber-based serial connections, while the compact silver housing reduces space in densely populated chassis. Compliance with CE, FCC and RoHS ensures the module meets common regulatory and environmental requirements for professional deployments.

Suitable for

• Short-range fiber uplinks between switches and access points
• Media converters that require an SFP fiber module
• Edge and distribution network ports in data closets and small server rooms
• Upgrading gigabit-capable fiber interfaces on compatible network equipment

Key specifications

• Interface type: SFP (hot-pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Typical housing colour: silver
• Form factor: small form-factor pluggable (SFP)
• Weight: 0.02 kg
• Reliability: MTBF approximately 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the module into an empty SFP port on a compatible switch, router or media converter until it seats firmly; the module is hot-pluggable so the host device typically does not require a power cycle. Connect the appropriate fiber optic cable to the module's transceiver port and verify link status via the host device's LED indicators or management interface. Configure the host port settings as required for the intended network speed and duplex mode. Follow the equipment vendor's instructions for SFP compatibility and port configuration.

Recommendations

Handle the transceiver with caution: avoid touching the optical interface, keep protective dust caps on when not connected, and store modules in anti-static packaging. Verify compatible fiber type and connector (single-mode or multimode as required) before deployment and confirm that the host device supports 1250 Mbit/s SFP modules.