SFP-lähetin-vastaanotinmoduuli BlueOptics 771-302-BO 1250 Mbit/s kuitu

The BlueOptics 771-302-BO 1250 Mbit/s Fiber optic SFP transceiver module is a compact optical interface designed for small form-factor pluggable (SFP) sockets. It supports a maximum data transfer rate of 1250 Mbit/s and is provided in a silver housing. With a mean time between failures (MTBF) of 1,000,000 hours and conformity to CE, FCC and RoHS standards, this module is suitable for integration into networking equipment that requires reliable single-channel fiber connectivity.

Advantages

The module's SFP form factor offers hot-pluggable flexibility and compatibility with a wide range of switches, routers and media converters that accept SFP modules. Its 1250 Mbit/s throughput supports typical fast Ethernet and certain legacy fiber links. The compact silver housing and low weight make it easy to handle and install in dense rack environments. Compliance with CE, FCC and RoHS ensures regulatory conformity for use in commercial and industrial network deployments.

Suitable for

• Fiber uplinks between switches and routers
• Media converters and network equipment with SFP slots
• Short- to medium-distance single-channel fiber links
• Replacement or expansion of existing SFP-based fiber ports

Key specifications

• Interface type: SFP (small form-factor pluggable)
• Maximum data transfer rate: 1250 Mbit/s
• Housing colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Ensure compatible SFP slot and matching fiber cabling, then insert the transceiver module into the equipment SFP port until it latches. Connect the appropriate fiber patch cable to the optical port, observing correct transmitter/receiver orientation. After physical installation, verify link status via device LEDs or management interface and configure the network interface parameters as required by your switch or router. For removal, power down or disable the port if recommended by the equipment vendor, then depress the latch and pull the module straight out.

Recommendations

Use this SFP transceiver in environments that match the supported fiber type and link budget. Avoid touching the optical connector endfaces; keep protective caps on when not in use. Follow the host equipment vendor's compatibility list and firmware recommendations to ensure proper operation.