SFP-lähetin-vastaanotinmoduuli BlueOptics 852-201/107-002-BO 155 Mbit/s

The BlueOptics 852-201/107-002-BO SFP transceiver module is a compact fiber optic interface designed for network equipment requiring a maximum data transfer rate of 155 Mbit/s. This single-port SFP module offers a silver-metal housing, light 20 g weight and a high mean time between failures (MTBF) of 1,000,000 hours, providing a durable interface for point-to-point and legacy synchronous optical networking applications.

Advantages

The module's SFP form factor ensures compatibility with a wide range of switches and routers that support hot-pluggable small form-factor pluggable transceivers. With a specified maximum data transfer rate of 155 Mbit/s and a robust MTBF value, the transceiver is suitable for stable, low-to-moderate bandwidth links. Its compact silver housing contributes to efficient rack and port density while the low weight simplifies handling and installation.

Suitable for

• Legacy SDH/SONET or ATM links requiring 155 Mbit/s interfaces
• Point-to-point fiber connections in enterprise or industrial networks
• Hot-swappable upgrades or replacements for compatible SFP ports
• Environments where long operational life and predictable reliability are required

Key specifications

• Interface type: SFP small form-factor pluggable
• Maximum data transfer rate: 155 Mbit/s
• Housing colour: silver metal casing
• Weight: approximately 0.02 kg
• Reliability: MTBF of 1,000,000 hours

How to use

Ensure the host device supports SFP transceivers and the required 155 Mbit/s data rate before installation. With the device powered down or following the host's hot-swap procedure, insert the transceiver into an available SFP port until it seats firmly. Connect the appropriate fiber optic cable to the transceiver's optical interface, observing correct connector type and polarity. After connection, verify link status and configure any network settings on the host device as needed for the intended application.

Recommendations

Store and operate the transceiver within the equipment manufacturer's recommended temperature and humidity ranges. Use compatible fiber types and connectors, and avoid excessive mechanical stress on the fiber and transceiver. Where possible, test the link speed and signal quality after installation to confirm reliable operation at 155 Mbit/s.