SFP+-lähetin-vastaanotinmoduuli BlueOptics 903239-BO 10000 Mbit/s kuituoptinen

The BlueOptics 903239-BO SFP+ transceiver module is a fiber optic pluggable unit designed for 10 Gbit/s networks. Housed in a durable silver metal casing and weighing approximately 20 g, this SFP+ module supports a maximum data transfer rate of 10000 Mbit/s and conforms to standard SFP+ physical form factor requirements. The compact module features an LC duplex interface type and is intended for insertion into compatible SFP+ ports to enable optical connectivity over multimode fiber.

Advantages

The module offers a compact, industry-standard SFP+ interface for easy installation and replacement. Its metal housing provides mechanical protection and thermal dissipation while the lightweight design minimizes stress on device cages. With an MTBF value of around 1,000,000 hours, the transceiver is specified for long service life and consistent optical performance in typical networking environments.

Suitable for

• 10 Gbit/s Ethernet uplinks and inter-switch links
• Data center switch and router ports with SFP+ support
• Optical connections over multimode fiber using LC duplex connectors
• High-density networking equipment requiring hot-pluggable transceivers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Connector: LC duplex (fiber optic)
• Housing material: metal (silver colour)
• Weight: 0.02 kg
• Suitable fiber type: multimode fiber (supports short-range multimode operation)
• Mean time between failures (MTBF): approx. 1,000,000 hours

How to use

Ensure the host device supports SFP+ transceivers and that the appropriate multimode fiber patch cords with LC duplex connectors are available. With the device powered down or following the host manufacturer’s hot-plug instructions, insert the BlueOptics 903239-BO into an empty SFP+ socket until it seats firmly. Connect the LC duplex patch cable between this transceiver and the corresponding remote transceiver or patch panel. Configure the host network interface as required for 10 Gbit/s operation and verify link status and diagnostics through the host system.

Recommendations

Use high-quality multimode fiber patch cords and proper LC duplex polishing/cleaning to maintain optical performance. Confirm firmware or compatibility lists for the host hardware where possible, and follow electrostatic discharge (ESD) precautions when handling the transceiver.