SFP-lähetin-vastaanotinmoduuli BlueOptics 90Y9424-BO 1250 Mbit/s 1310 nm

The BlueOptics 90Y9424-BO is an SFP transceiver module designed for single-fiber network links. It supports a maximum data transfer rate of 1250 Mbit/s and operates at a wavelength of 1310 nm. The module features a compact SFP interface in a silver housing and meets RoHS compliance, offering a lightweight option at approximately 20 g suitable for a variety of network equipment with SFP ports.

Advantages

This SFP transceiver provides compatibility with standard SFP slots and supports up to 1250 Mbit/s throughput, enabling reliable single-mode optical connections at 1310 nm. The module’s small form factor and 20 g weight allow easy installation and low impact on equipment space and weight budgets. RoHS compliance ensures the module conforms to electrical and environmental safety regulations.

Suitable for

• Short- to medium-distance single-mode fiber links
• Switches, routers and media converters with SFP ports
• Network upgrades where 1250 Mbit/s optical connectivity is required
• Environments requiring RoHS-compliant components

Key specifications

• Interface type: SFP form factor
• Maximum data transfer rate: 1250 Mbit/s
• Wavelength: 1310 nm
• Operating media: single-mode fiber (typical for 1310 nm)
• Housing colour: silver
• Weight: 0.02 kg
• Compliance: RoHS

How to use

Install the BlueOptics SFP transceiver into any compatible SFP slot on network switches, routers or media converters while the device is powered down or following hot-swap procedures supported by the equipment. Connect single-mode fiber patch cables to the transceiver’s optical port, ensuring correct connector type and polarity. Verify link LEDs and network interface status in the host device to confirm successful operation. Configure link speed and duplex settings in the host device as required for the network.

Recommendations

Store and handle the transceiver in clean, dry conditions and avoid touching the optical interface. Use appropriate single-mode fiber cables and follow equipment vendor guidelines for SFP compatibility. For reliable operation, verify that the host device firmware and transceiver specifications match, and perform link tests after installation.