SFP lähetin-vastaanotinmoduuli BlueOptics AA1419043-E6-BO kupari 1250 Mbit/s

The BlueOptics AA1419043-E6-BO Copper SFP transceiver module is a compact hot-pluggable interface designed for short-range copper connections in network equipment. With an SFP form factor and a maximum data transfer rate of 1250 Mbit/s, the module provides a standard 1.25 Gbps connection option for switches, routers and media converters that support SFP ports. The module is finished in silver and has an MTBF of 1,000,000 hours, reflecting expected reliability for continuous operation. It is CE, FCC and RoHS certified and supplied as a lightweight unit suitable for typical rack-mounted and desktop networking devices.

Advantages

The BlueOptics Copper SFP offers a compact SFP form factor that enables dense port deployments while maintaining compatibility with common networking hardware. Rated for up to 1250 Mbit/s, it supports standard 1.25 Gbps links over copper cabling and is compliant with CE, FCC and RoHS standards, ensuring regulatory conformity. Its low weight and established MTBF provide predictable physical handling and operational lifespan information for planning and inventory.

Suitable for

• Upgrading or replacing 1.25 Gbps copper SFP ports in switches and routers
• Media converters and other devices requiring a standard SFP copper transceiver
• Dense networking environments where compact SFP modules are preferred
• Short-distance connections using copper cabling within data centers or wiring closets

Key specifications

• Interface type: SFP (Small Form-factor Pluggable)
• Maximum data transfer rate: 1250 Mbit/s (1.25 Gbps)
• Form factor: SFP hot-pluggable module
• Product colour: Silver
• Weight: 0.02 kg (20 g)
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP module into an available SFP port on a compatible switch, router or media converter while the device is powered down or, if supported, hot-plug while powered. Ensure the module is fully seated and the retaining latch is engaged. Connect the appropriate copper cable to the module’s port. Verify link lights and network configuration on the host device to confirm a stable 1.25 Gbps link. For removal, disengage the latch and pull the module straight out to avoid damage to the SFP cage or connector.

Recommendations

Use shielded twisted-pair copper cabling of appropriate category for the intended distance and environment; check host-device compatibility with third-party SFP modules and keep firmware updated. Store spare modules in anti-static packaging and avoid exposure to excessive moisture, dust or mechanical stress to preserve the rated MTBF and performance.