SFP-lähetin-vastaanotinmoduuli BlueOptics AT10027-ID-R-BO 1250 Mbit/s

The BlueOptics AT10027-ID-R-BO 1250 Mbit/s SFP transceiver module is a compact fiber optic module designed for socketed SFP ports in network equipment. It supports a maximum data transfer rate of 1250 Mbit/s and comes in a lightweight silver housing, offering a straightforward plug-and-play option for extending or upgrading fiber links in switches, routers and media converters. The module's small form factor and standard SFP interface make it compatible with devices that accept SFP form-factor transceivers.

Advantages

The module provides a standard SFP interface for easy installation and interchangeability across compatible network devices. With a specified maximum data transfer rate of 1250 Mbit/s it supports common gigabit-class serial links and legacy fiber applications. The silver, low-weight design (approx. 40 g) simplifies handling and reduces mechanical strain on SFP cages during insertion and removal. The product is intended to deliver stable optical connectivity when used within supported network configurations.

Suitable for

Key specifications

How to use

Power down equipment if required by the host device instructions, then insert the BlueOptics AT10027-ID-R-BO into an empty SFP cage until it clicks into place. After mechanical installation, connect the appropriate optical fiber cable and secure any dust caps or cable strain relief. Follow the host device configuration procedures to enable the port and verify link status. When removing the module, power down or disable the port according to the equipment manual and extract the module by pressing the release mechanism and pulling it straight out to avoid damage.

Recommendations

Ensure compatibility with the host device by checking SFP support and optical specifications before installation. Use suitable single-mode or multimode fiber and clean connector endfaces to maintain signal quality. Store unused modules with dust caps fitted in a dry, static-safe environment.