SFP-lähetin-vastaanotinmoduuli BlueOptics BO05M13602D 155 Mbit/s kuitu

The BlueOptics BO05M13602D 155 Mbit/s Fiber optic SFP transceiver module is a compact optical networking component designed for single-port fibre links. It supports a maximum data transfer rate of 155 Mbit/s and uses the standardized SFP interface for hot-pluggable installation in compatible switches and routers. The module's metallic housing provides mechanical protection and helps with thermal dispersion, while a rated mean time between failures (MTBF) of 1,000,000 hours indicates long-term operational reliability. This transceiver is compatible with HPE Aruba J9054DCM and meets RoHS, CE, FCC and ISO9001 conformity requirements.

Advantages

The module's SFP form factor allows easy insertion and removal without powering down equipment, making maintenance and upgrades straightforward. A maximum throughput of 155 Mbit/s fits legacy and low-bandwidth fibre applications where predictable, steady links are required. The metallic enclosure contributes to durable physical protection and heat dissipation, while the specified MTBF supports planning for continuous operation. Compliance with common regulatory standards ensures interoperability and adherence to environmental and safety expectations.

Suitable for

• Single-fibre or duplex fibre connections in access and edge networking
• Interfacing legacy equipment requiring 155 Mbit/s optical links
• Small campus, branch office or industrial network segments
• Replacement or expansion modules for compatible SFP ports

Key specifications

• Interface type: SFP (hot-pluggable)
• Maximum data transfer rate: 155 Mbit/s
• Material/finish: metallic housing for mechanical protection
• Mean time between failures (MTBF): 1,000,000 hours
• Weight: 0.02 kg
• Standards compliance: RoHS, CE, FCC, ISO9001

How to use

Install the BlueOptics SFP transceiver into an empty compatible SFP slot on your switch or router while the device is powered according to the equipment manufacturer's instructions for hot-plugging. After seating the module, connect the appropriate fibre cable and ensure correct transmit/receive orientation. Verify link status through the host device management interface or indicator LEDs. If replacing a module, remove the original per the host manual and handle the optical interfaces with care to avoid contamination; use protective caps when ports are unused.

Recommendations

Install and remove the transceiver in a clean environment, keep fibre connectors capped when not in use, and inspect or clean fibre endfaces with suitable tools to maintain signal quality. Confirm host device compatibility (SFP slot and supported data rate) before deployment and follow your organisation's change control for network updates.