SFP+-lähetin-vastaanotinmoduuli BlueOptics RDH10265/25-R1A-40-BO 10000 Mbit/s 1550 nm

The BlueOptics RDH10265/25-R1A-40-BO is an SFP+ transceiver module engineered for 10 Gbit/s fibre connections. Operating at a wavelength of 1550 nm and requiring a 3.3 V input, the module supports high-speed data transfer in compact networking equipment. With a lightweight metal housing and SFP+ interface, it is suitable for use in switches, routers and optical link endpoints where reliable single‑mode or long‑reach connections are needed.

Advantages

The module delivers a stable 10000 Mbit/s throughput with SFP+ compatibility for easy hot‑swappable installation. Its 1550 nm wavelength provides improved reach for long‑distance fibre links while the low weight and compact silver housing reduce space and thermal load in dense equipment racks. Requiring only a standard 3.3 V power supply, the transceiver is compatible with a wide range of network devices that support SFP+ modules.

Suitable for

Key specifications

How to use

Install the transceiver into an empty SFP+ slot on a compatible switch, router or optical device while the host device is powered down or following the vendor's hot‑swap instructions. Connect the appropriate single‑mode fibre cable to the module's optical interface, ensuring correct polarity and secure connector seating. After insertion and link establishment, verify optical signal and link status through the host device management interface and monitor for correct data rate and error counters.

Recommendations

For reliable performance, use certified single‑mode optical fibre and clean connectors before mating. Match the transceiver's wavelength and reach to the fibre link budget, and confirm device compatibility with SFP+ ports that support 10 Gbit/s optics. Avoid exposure to electrostatic discharge during handling and follow the equipment manufacturer's installation guidelines.