SFP-lähetin-vastaanotinmoduuli BlueOptics SFP-GTP-BO kupari 1250 Mbit/s

The BlueOptics SFP-GTP-BO Copper 1250 Mbit/s is an SFP transceiver module designed for copper-based network links up to 1250 Mbit/s. Housed in a metal casing and powered from a 3.3 V supply, the module is compact and lightweight (approx. 3 g) and fits standard SFP ports conforming to MSA form factor. It provides a single-port interface for integrating gigabit Ethernet or related serial data applications into switches, routers and other network devices that accept SFP copper modules.

Advantages

This BlueOptics SFP module offers a compact metal housing for mechanical stability and EMI resilience while keeping weight to a minimum. The module supports a maximum data rate of 1250 Mbit/s, allowing compatibility with 1000BASE-T and similar Gigabit Ethernet protocols. Operating at a 3.3 V input voltage, it matches the power requirements of most SFP slots. The product colour and construction support easy handling and standard installation procedures in rack and field equipment.

Suitable for

Key specifications

How to use

Insert the SFP-GTP-BO module into a compatible SFP slot on the target device until it locks into place, then connect a suitable RJ45 copper cable to the module. Ensure the host device supports copper SFP transceivers and the intended data rate. After insertion, verify link status and negotiate speed/duplex through the device management interface. Remove the module by releasing the latch and pulling it straight out to avoid damage to the SFP cage.

Recommendations

Use Cat5e or Cat6 twisted-pair cable for distances up to 100 m and ensure the host hardware firmware supports third-party SFP modules. For stable operation, confirm the device provides a 3.3 V SFP power supply and, where available, enable link diagnostics or DDM/DOM features supported by the hardware to monitor voltage and signal parameters.