SFP-lähetin-vastaanotinmoduuli BlueOptics SFP-SWRT-SR-BO kuitu SFP+ 300 m

The BlueOptics SFP-SWRT-SR-BO is a fiber optic SFP+ transceiver module designed for 10GBASE-SR multi-mode links up to 300 m. The module uses 850 nm transmit and receive wavelengths with an LC duplex connector and an aluminum housing that keeps weight low while providing mechanical durability. It is intended for use in network equipment that supports SFP+ MSA-compliant transceivers and offers support for Ethernet and related high-speed protocols.

Advantages

This SFP+ transceiver is manufactured to MSA standards to ensure functional compatibility with major vendor hardware that supports the original 10GBASE-SR SFP+ modules. The compact aluminum form factor and 20 g weight make it easy to deploy in dense switch and router environments. Components such as high-quality laser diodes and integrated circuits are selected to provide stable optical performance, extended lifetime and high MTBF for long-term availability. Where supported by the host device, the module provides digital diagnostics (DDM/DOM) for real-time monitoring of optical parameters.

Suitable for

• 10 Gigabit Ethernet short-reach links over multi-mode fiber
• Interconnection between switches, routers, storage systems and servers
• Data center uplinks, aggregation and distribution layers

Key specifications

• Interface type: SFP+
• Optical wavelength: 850 nm (TX/RX)
• Connector: LC duplex
• Maximum reach: up to 300 m over multi-mode fiber
• Housing material: aluminium
• Weight: approximately 0.02 kg
• Supported protocols: 10G Ethernet and related high-speed optical standards
• Digital diagnostics: DDM/DOM (where supported by host hardware)

How to use

Insert the SFP+ transceiver into an available SFP+ port on the host device until it latches. Connect LC duplex fiber patch cords matching the module's transmit and receive fibers to the corresponding ports. Power on the connected devices and verify link status via the host equipment management interface. If supported, enable or check DDM/DOM readings in the host system to monitor supply voltage, laser bias current, transmit power, receive power and module temperature. Follow the host vendor guidelines for hot-plug handling and ESD precautions when installing or removing the module.

Recommendations

Use certified multi-mode fiber (OM3/OM4 as appropriate) and LC duplex patch cords for optimal reach and performance. Confirm compatibility with the host device firmware and enable DDM/DOM only if the hardware supports it. Avoid excessive bending of fiber cables and secure connections in racks and patch panels to maintain signal integrity and long-term reliability.