SFP-lähetin-vastaanotinmoduuli BlueOptics SFPGLHX30D-BO 1250 Mbit/s 1310 nm

The BlueOptics SFPGLHX30D-BO is an SFP fiber optic transceiver module designed for compact, reliable network connectivity. Supporting a maximum data transfer rate of 1250 Mbit/s and operating at a wavelength of 1310 nm, the module provides single-mode optical transmission suitable for many standard networking links. Housed in metal and powered by a 3.3 V input, the transceiver combines durability with low weight (approximately 2 g) and a small form factor that fits SFP ports on switches, routers and other communication equipment.

Advantages

The metal housing offers mechanical protection and thermal stability while the standardized SFP interface ensures wide compatibility with networking devices that accept SFP modules. With a 1310 nm wavelength and 1250 Mbit/s signalling, the module is suitable for long-reach single-mode links where optical performance and predictable behaviour are required. The compact size and light weight make handling and installation straightforward, and the 3.3 V operating voltage matches common transceiver power specifications.

Suitable for

• Single-mode fiber uplinks between switches and routers
• Data centre interconnects and server network ports
• Telecom and enterprise access links requiring 1250 Mbit/s
• Equipment upgrades where a metal-housed SFP transceiver is needed

Key specifications

• Interface type: SFP form factor
• Maximum data transfer rate: 1250 Mbit/s
• Operating wavelength: 1310 nm
• Operating voltage: 3.3 V
• Housing material: metal
• Weight: approx. 0.002 kg
• Product colour: silver

How to use

Install the BlueOptics SFPGLHX30D-BO by inserting the module into an empty SFP port following the host device manufacturer’s guidelines, ensuring proper orientation and seating until it latches. Connect a compatible single-mode optical fiber patch cable to the module’s optical port. Power up the host device and verify link status in the device management interface or LEDs; adjust transceiver configuration as required by the network equipment. For removal, power down or follow hot-swap procedures recommended by the equipment vendor and gently eject the module using the SFP latch.

Recommendations

Use single-mode fiber patch cords and compatible SFP-capable network equipment to ensure correct operation. Avoid exposing the transceiver to moisture or excessive mechanical shock. Follow ESD precautions when handling the module and consult the host device documentation for any required firmware or compatibility notes.