SFP-lähetin-vastaanotinmoduuli BlueOptics SPL-34-GB-BD-IDFM-BO 1250 Mbit/s

The BlueOptics SPL-34-GB-BD-IDFM-BO 1250 Mbit/s SFP transceiver module is a compact fiber optic module designed for standard SFP ports. Housed in a metal casing with a silver finish, this module supports a maximum data transfer rate of 1250 Mbit/s and operates from a 3.3 V input. Compliant with RoHS requirements and weighing approximately 2 g, it is intended for reliable short- to medium-range optical data links in networking equipment that accepts SFP form-factor modules.

Advantages

The module’s metal housing provides mechanical protection and thermal stability while its SFP interface ensures broad compatibility with network switches, routers and media converters that accept SFP modules. Low weight and standard 3.3 V operation make it suitable for installations where power and space constraints matter. RoHS compliance indicates reduced hazardous substances in the component.

Suitable for

• Replacement or upgrade of SFP slots in switches and routers
• Fiber optic links in local area network (LAN) segments
• Media converters and industrial network devices requiring SFP modules
• Short- to medium-distance optical connections compatible with 1250 Mbit/s line rate

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 1250 Mbit/s
• Operating voltage: 3.3 V
• Housing: metal, silver colour
• Weight: approximately 2 g
• Standards: RoHS compliant

How to use

Install the BlueOptics SFP transceiver by inserting it into a compatible SFP slot on the host device until it latches. Connect the appropriate fiber optic cable to the module’s optical interface, taking care to match connector types and fiber polarity. Ensure the host device is configured for the corresponding optical port and speed; the module operates at the standard SFP 3.3 V supply. Handle the transceiver by its housing to avoid touching optical interfaces and use dust caps when the module is not connected.

Recommendations

Verify compatibility with the host equipment and the required fiber type before installation. Store and handle the module in a clean, dry environment to prevent contamination of optical surfaces. Observe ESD precautions when handling the transceiver and replace dust caps when not in use to maintain signal integrity.