SFP+-lähetin-vastaanotinmoduuli BlueOptics USFP+-192/SS12-BO 10000 Mbit/s 1330 nm

The BlueOptics USFP+-192/SS12-BO is an SFP+ fiber optic transceiver module designed for 10 Gigabit Ethernet links. It supports a maximum data transfer rate of 10000 Mbit/s and operates with optical signalling around 1330 nm. The module is housed in a durable metal casing, weighs approximately 20 g and uses an LC simplex fiber connector for single-mode fiber connections. It meets CE, FCC and RoHS standards and is suitable for long-range links up to 20 000 m when used with compatible single-mode fiber and network equipment.

Advantages

The transceiver provides 10G connectivity in a compact, hot-pluggable SFP+ form factor and is compatible with equipment that accepts standard 10 Gigabit SFP+ modules. Its metal housing supports secure mounting and heat dissipation while the LC connector enables standard single-fiber connections. Compliance with common regulatory standards ensures basic electromagnetic and safety conformity. The small weight and standardized interface make installation and replacement straightforward in racks, switches and optical equipment.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP+ module into a compatible SFP+ slot while the host device is powered down or hot-plug according to the equipment manufacturer's instructions. Connect an appropriate single-mode LC patch cable to the module and ensure the opposite end is mated with a compatible transceiver or patch panel. Configure the host port for 10G operation if required by the switch or router. Verify link status and, where supported, use the host device management interface to monitor operational parameters.

Recommendations

For best performance, use single-mode fiber and LC patch cords rated for the intended distance, ensure the host hardware supports SFP+ 10GBASE-BX-D/BX-U or equivalent bidirectional operation if applicable, and confirm Digital Diagnostics (DDM/DOM) support in the host for real-time monitoring. Avoid exposure of optical interfaces to dust and follow ESD precautions when handling the module.