SFP28 lähetin-vastaanotinmoduuli BlueOptics BO04Q33610DIN 25000 Mbit/s

The BlueOptics BO04Q33610DIN is an SFP28 transceiver module designed for high-speed fiber connections. With a maximum data transfer rate of 25,000 Mbit/s and support for distances up to 10,000 m, this compact silver SFP28 module fits standard SFP28 slots and provides a reliable optical link using an LC connector. The module is CE, FCC and RoHS compliant and has a calculated MTBF of 3,000,000 hours. Its small form factor and 20 g weight make it suitable for dense installations and equipment with limited space.

Advantages

The BlueOptics BO04Q33610DIN offers a high maximum data rate combined with long-reach capability, enabling use in backbone and campus networks. Its SFP28 form factor ensures compatibility with modern 25 Gigabit-capable network ports while the LC fiber connector provides industry-standard optical coupling. Compliance with CE, FCC and RoHS standards and a high MTBF indicate engineered reliability and regulatory conformity for professional deployments.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP28 module in a compatible SFP28 slot on a switch, router or media converter, ensuring the device is powered down or hot-swap capable according to the host equipment manual. Connect a single-mode or multimode fiber cable with LC connectors as required by your network design. Configure the host port for the desired link speed and duplex settings if necessary; most modern equipment will auto-negotiate. Verify link status and diagnostics through the host device management interface.

Recommendations

Use factory-tested LC fiber cables and ensure proper fiber cleanliness to maintain optimal signal quality. Match the transceiver type and optical specifications to the fiber type and distance requirements of your network. When installing multiple modules, follow the host vendor’s guidelines for firmware compatibility and supported vendor lists to avoid interoperability issues.