SFP28-transceiver-moduuli BlueOptics 407-BCPP-BO 25 000 Mbit/s

The BlueOptics 407-BCPP-BO SFP28 transceiver module is a compact fiber optic interface designed for high-density networking equipment. It supports a maximum data transfer rate of 25,000 Mbit/s and is compatible with SFP28 slots. The module uses an LC fiber connector and is intended for short-range links up to 100 m, providing a space-saving silver form factor and a lightweight solution for server, switch and storage interconnects.

Advantages

The module delivers 25 Gbit/s-capable performance in an industry-standard SFP28 form factor, allowing straightforward integration into existing high-speed ports. Its LC connector and 100 m maximum transfer distance make it suitable for short multimode or short-range single-mode links depending on system configuration. With a mean time between failures (MTBF) of 1,000,000 hours and a weight of approximately 20 g, the transceiver offers reliability and low physical impact on dense port panels.

Suitable for

• High-density 25 Gbit/s uplinks between switches and servers
• Short-range fiber connections within data centers and server rooms (up to 100 m)
• Network equipment upgrades where SFP28 compatibility is required

Key specifications

• Form factor: SFP28
• Maximum data transfer rate: 25,000 Mbit/s
• Maximum transfer distance: 100 m
• Fiber optic connector: LC
• Ethernet interface type: 2.5 Gigabit Ethernet
• Product colour: Silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the BlueOptics 407-BCPP-BO by inserting it into a compatible SFP28 port on your switch, router or server until it clicks into place. Connect an LC-terminated fiber patch cable to the module's LC connector, observing correct transmit/receive orientation. Configure the host device network interface for the intended speed and duplex settings if required; many systems will auto-negotiate or detect the module. Ensure proper handling to avoid contamination of optical interfaces and follow equipment power-down procedures if hot-swap is not supported.

Recommendations

Use clean LC connectors and follow standard fiber handling practices to maintain signal quality. Verify compatibility with the system vendor’s supported transceiver list, and keep fiber patch runs within the specified maximum distance of 100 m to ensure reliable 25 Gbit/s performance.