DIN-kiskorele Wave Pro 2PM max. 25A 1-vaiheinen 2x 16A mittaus-toiminnolla Z-Wave

The Shelly Qubino Wave Pro 2PM is a professional 2-channel DIN-rail Z-Wave smart relay with integrated power metering designed for remote control of electrical loads in homes and commercial facilities. Built for installation inside a breaker box, it supports one-phase operation with two relays, each rated up to 16 A and a total device capacity of 25 A. The device includes two independent power meters for monitoring consumption per channel or combined, and it operates on the latest S800 Z-Wave chip generation for compatibility with certified Z-Wave gateways.

Advantages

Wave Pro 2PM provides precise power monitoring for each channel (W) and combined (W, kWh), supports secure Z-Wave S2 Authenticated communication, and fits on DIN-rail for neat installation inside breaker boxes. It offers associations for direct device-to-device actions without a hub, dynamic control of lighting and appliances through schedules and scenes, and built-in protections including temperature, overpower, overvoltage (where applicable) and overheating shutdown. The unit is compact, lightweight, and suitable for both residential and commercial automation projects.

Suitable for

• DIN-rail installation in residential electrical panels
• Office and commercial facility automation (lighting, projectors, HVAC control)
• Energy monitoring and consumption optimization per circuit
• New building automation and retrofit projects requiring Z-Wave integration

Key specifications

• Model: Wave Pro 2PM (MPN: WavePro2PM, EAN: 3800235269121)
• Type: 2-channel Z-Wave relay with power metering
• Supply / Operating voltage: 110–240 V AC
• Output current: up to 16 A per channel, total device output 25 A
• Measurements: power per channel (W) and combined (W, kWh)
• Mounting: DIN-rail (breaker box) installation
• Wireless: Z-Wave (S800 chip), compatible with Z-Wave gateways and over 4000 certified devices
• Security: Z-Wave Security 2 (S2) Authenticated
• Protections: temperature, overpower, overvoltage* and overheating shutdown
• Dimensions and weight: compact form factor (refer to manufacturer for exact dimensions)

How to use

Install the unit on a DIN-rail inside the breaker box and connect the supply and load conductors according to local electrical standards. After power-up, include the device into your Z-Wave network using a compatible Z-Wave gateway to enable remote control, scheduling, scenes, and energy monitoring. Use the two channels independently to control separate circuits or combine them for higher total loads up to 25 A. Configure associations if you need direct local interactions between Z-Wave devices without a hub. Monitor real-time and historical consumption through your Z-Wave controller or gateway interface.

Recommendations

Use Wave Pro 2PM for circuits within its rated voltage and current limits, verify wiring and protection devices before installation, and include it in a Z-Wave gateway that supports S2 security for encrypted communication. For energy optimization, pair the relay with motion sensors and schedules to automate lighting and power-off non-essential equipment outside working hours. Consult a qualified electrician for installation and for applications that approach the device’s maximum current ratings.