Koaksiaalikaapeli S/CONN 80065-32 5 m F-liitin IEC valkoinen

The ShiverPeaks S/CONN 80065-32 5 m coaxial cable provides a reliable connection between devices using an F-type connector on one end and an IEC connector on the other. Designed for audio and video signal transmission, this 5-meter white cable is intended for home entertainment systems and professional AV installations where consistent signal quality and a straightforward connection are required.

Advantages

This coaxial cable combines a standardized F-type plug and an IEC plug to ensure compatibility with a wide range of tuners, set-top boxes, televisions and antenna systems. Its 5 m length balances reach and signal integrity for typical room-to-equipment setups. The white exterior offers a discreet appearance that integrates with light-colored interiors and cable routing along walls.

Suitable for

• Connecting a TV to a set-top box or satellite/cable receiver
• Linking an antenna to a television or tuner
• Audio/video installations in living rooms, bedrooms, and home theaters
• Temporary or permanent professional AV setups requiring standardized connectors

Key specifications

• Cable type: coaxial cable with F-type to IEC connectors
• Length: 5 meters
• Colour: white
• Connector types: male F-type on one end, male IEC on the other end
• Intended signals: RF audio/video and broadcast TV frequencies

How to use

Connect the F-type connector to the corresponding socket on the source device (for example a satellite receiver, cable box or antenna amplifier) and attach the IEC connector to the television or tuner input. Ensure connectors are pushed on securely and, if threaded, hand-tighten the F-type coupling to avoid loose connections. Route the cable to avoid sharp bends and pinching which can degrade signal quality.

Recommendations

For optimal performance, keep cable runs as short as practical and avoid running parallel to power cables to minimize interference. If using in-wall installation, verify local regulations and use appropriate conduit or in-wall rated cabling where required. Inspect connectors periodically for corrosion or looseness and replace the cable if you notice persistent signal loss.