Sisäinen virtakaapeli DELOCK 80975 — 8-napainen PCI-E 6+2-napaiseen, 0,3 m

DELOCK 80975 is an internal power extension cable designed to connect an ATX 8-pin power output to devices with a PCI‑E 6+2-pin input. The textile‑sheathed cable is 0.3 m long, comes in black and red, and is supplied as a single piece for use inside a computer case to extend or adapt power connections for graphics cards or other PCI‑E devices.

Advantages

The cable provides a straightforward extension from an 8-pin ATX power connector to a PCI‑E 6+2-pin input, allowing compatibility with devices that require either a 6-pin or 8-pin power feed. Its textile sheath offers additional mechanical protection and a neat appearance inside the system. The short 0.3 m length reduces clutter while keeping the connection secure and close to the components.

Suitable for

• Extending an ATX 8-pin power output to a PCI‑E 6+2-pin graphics card
• Connecting PCI‑E devices that accept either 6-pin or 6+2-pin power
• Internal cable routing in compact or standard PC cases where a short extension is needed

When it may not be suitable

This cable is intended for internal use inside a computer case and is not rated for external or exposed installations. It does not change voltage or provide additional power beyond the originating power supply; using it with an insufficient PSU or adapters that exceed the PSU's capability is not recommended.

Key specifications

• Cable length: 0.3 m
• Connector A: 8-pin (male) straight
• Connector B: PCI‑E 6+2-pin (female) straight
• Sheathing: textile
• Color: black and red
• Quantity: 1 piece

How to use

Power off the system and unplug the power supply before installation. Route the cable inside the case to avoid obstructing airflow or fans. Insert the 8-pin male connector into the corresponding ATX power output on the power supply or motherboard header, and connect the PCI‑E 6+2-pin female connector to the graphics card or other PCI‑E device, ensuring correct alignment and secure seating. Recheck connections before powering on the system.

What to consider before purchase

• Verify that your power supply or motherboard provides an 8-pin output compatible with this connector type
• Ensure the 0.3 m length is sufficient for your internal routing needs
• Confirm that your PSU can supply adequate power for the connected PCI‑E device

Recommendations

Use this Delock internal extension cable for short internal power routing or to adapt an available 8-pin output to a PCI‑E 6+2-pin device; always handle connectors gently and ensure the system is powered down when installing or removing the cable.