Sisäinen virtakaapeli DeLOCK 85456 0,15 m Floppy Molex

The DeLOCK 85456 internal power cable is a 0.15 m lead that converts a 4-pin Floppy (also called Berg) power connector to a 4-pin Molex connector, allowing a device with a Molex 4‑pin receptacle to be powered from an available Floppy power plug on the PSU. Its short length and standard connectors make it suitable for tight spaces inside PC cases where a direct power feed is required.

Advantages

This cable provides a simple and reliable way to supply power from a Floppy 4-pin connector to a Molex 4-pin device without the need to modify existing wiring. The compact 0.15 m length reduces cable clutter and helps maintain tidy internal cable routing. It uses standard colour-coded wires (black, red, white, yellow) and industry-standard connectors for compatibility with common PC power supplies and peripherals.

Suitable for

• Powering legacy floppy drives from an available Floppy 4-pin connector
• Supplying power to small peripherals or adapters that use a Molex 4-pin socket
• Use in compact or crowded PC cases where a short cable run is required

Key specifications

• Cable length: 0.15 m
• Connector 1: Floppy (4-pin)
• Connector 2: Molex (4-pin)
• Product colour: Black, Red, White, Yellow
• Brand: DELOCK
• MPN: 85456
• EAN: 4014619713493

How to use

Connect the Floppy (4-pin) plug to the free Floppy power connector from the power supply and insert the Molex (4-pin) connector into the device requiring power. Ensure both connectors are fully seated and that the PC is powered off while making connections. Verify correct orientation to avoid reverse polarity before switching the system on.

Recommendations

Use this cable only for low-voltage internal power connections in desktop PCs. Do not force connectors; if fit seems incorrect, check connector type and orientation. Avoid routing the cable near sharp edges or hot components and do not use the cable in place of standard, recommended PSU connectors for high-current devices.