Sokeaniitti GESIPA 1432058 teräs harmaa 9,5 mm pää 4,8 mm varsi 10 mm pituus

Blind rivet GESIPA 1432058 is a steel PolyGrip mini-pack rivet with a grey finish, 9.5 mm head diameter, 4.8 mm shank (tail) diameter and 10 mm overall length. Supplied in a pack of 50 pieces, this multi-range blind rivet is designed for reliable fastening in applications where varying hole tolerances or mixed base materials are present.

Advantages

The PolyGrip design provides a large clamping area and excellent hole-filling capability, allowing radial deformation of the shank during installation to compensate for borehole inaccuracies, centre offset and diameter differences. This rivet locks the spent mandrel securely to prevent rattling and loss of mandrels, offers splash resistance under certain conditions and forms a wide closing head for good tensile strength. Its versatility means it can replace multiple standard DIN blind rivet sizes and serves as an economical alternative to closed blind rivets.

Suitable for

• Joining steel, aluminium or stainless steel components
• Indoor and outdoor fastening where water ingress must be minimised
• Applications with variable or imprecise hole diameters
• Small assembly jobs and DIY projects (pack of 50)

Key specifications

• Brand: GESIPA
• MPN: 1432058
• EAN: 4007081012843
• Material: Steel (rivet body and mandrel)
• Finish/colour: Grey
• Head diameter: 9.5 mm
• Shank (tail) diameter: 4.8 mm
• Overall length: 10 mm
• Pack quantity: 50 pieces

How to use

Drill or prepare the hole to the appropriate nominal diameter for a 4.8 mm shank. Insert the blind rivet into the joint so the head sits flush against the material surface. Using a suitable blind rivet tool, pull the mandrel until the rivet deforms and forms a wide closing head on the blind side. Continue pulling until the mandrel breaks and the spent mandrel is locked in place. Verify the joint for tightness and correct seating.

Recommendations

Use a rivet tool rated for 4.8 mm steel rivets and check hole alignment before installation. For best results on different material thicknesses, confirm grip range compatibility and test a sample joint to ensure proper hole filling and sealing.