SSD-asema Kingston Technology 3,84 TB 2,5" SATA DC600ME

Kingston DC600M and DC600ME are fourth-generation data center SATA 3.0 (6 Gbps) SSDs using 3D TLC NAND, developed for mixed-use server workloads. Both models include on-board power-loss protection via hold-up capacitors to protect data during unexpected power failures and ensure drives reinitialise correctly at the next system power-up. They are designed for low latency and consistent I/O performance for system integrators, hyperscale data centers and cloud service providers. DC600ME adds hardware AES 256-bit encryption and supports TCG OPAL 2.0. Available capacities range from 480GB to 7.68TB to match storage requirements.

Advantages

The DC600 series is optimised for data center environments and RAID server applications where low latency and predictable I/O are required. Built-in power-loss protection minimises the risk of data corruption during abrupt power outages. DC600ME provides hardware-based AES 256-bit encryption and TCG OPAL 2.0 support for enhanced data security. Capacities up to 7.68TB allow flexible storage scaling.

Key specifications

• Interface: SATA 3.0 (6 Gbps)
• NAND type: 3D TLC
• Intended use: Mixed-use data center/server workloads
• Power-loss protection: On-board hold-up capacitors (hardware PLP)
• Encryption (DC600ME): AES 256-bit, TCG OPAL 2.0
• Capacities: 480GB–7.68TB

How to use

Install the SSD into a compatible SATA 3.0 slot or drive bay following server or system manufacturer instructions. Configure RAID or standalone volumes according to your deployment needs and verify firmware and security settings. For DC600ME, enable hardware encryption and TCG OPAL 2.0 in the system management tools if required. Monitor performance and health with standard SSD monitoring utilities and follow data center maintenance procedures.

Recommendations

Use DC600M/DC600ME in server and data center environments requiring consistent I/O and low latency. Choose DC600ME when hardware-based AES 256-bit encryption and TCG OPAL 2.0 compliance are needed. Ensure proper power-loss protection at the system level and follow vendor guidelines for firmware updates and RAID configurations.