Sunlu PLA Glow In The Dark -filamentti, vihreä

Sunlu PLA Glow-in-the-Dark Filament is an excellent choice for anyone looking to give their 3D prints a unique, eye-catching look. The material contains phosphorescent components that allow it to glow in the dark after absorbing light, creating a striking glow. The intensity of the effect is even greater after exposure to UV light, making this filament ideal for creating decorations, gadgets, decorative models, or elements that stand out after dark. However, keep in mind that this type of material should not be exposed to direct sunlight for long periods, as this can accelerate color fading.

• Precision You Can Rely On

Sunlu has ensured high manufacturing precision for this filament, so the material delivers stable and predictable performance during printing. A diameter of 1.75 mm results in even filament feed and greater print consistency. This is particularly important for projects requiring an aesthetic finish and high repeatability. The 1 kg spool allows for convenient printing of both smaller models and more complex projects without the need for frequent material changes.

• Ready to use

The filament has been designed with your convenience and smooth printer operation in mind. Before packaging, it is dried for 24 hours and then placed in vacuum-sealed packaging with a desiccant inside a resealable nylon bag. This protection helps keep the material in optimal condition and reduces the risk of printing issues. As a result, Sunlu PLA Glow In The Dark supports clog-free and bubble-free printing, allowing you to focus fully on creating rather than troubleshooting technical issues.

• Wide Compatibility

Sunlu PLA Glow In The Dark works with all popular FDM 3D printers that support 1.75 mm filament, so you can easily adapt it to your equipment. High manufacturing standards and tight diameter tolerances ensure the material works seamlessly with many devices, delivering stable and satisfying results. This is the perfect choice for users seeking a striking glow-in-the-dark material, as well as quality, reliability, and ease of use at every stage of printing.

• Model: PLA Glow FG
• Color: Green
• Filament diameter: 1.75/3.0 mm
• Printing temperature: 200–210°C
• Bed temperature: No heating: apply adhesive / Heating 50–65°C: do not apply adhesive
• Tensile strength KGF: 11–16 (factory standard at 23°C, wire diameter 1.75 mm)
• Melting rate: 7–9 g/10 min (190°C, 2.16 kg) (according to GB/T 3682.1-2018)
• Elongation at break: 4% (in-house standard at 23°C, wire diameter 1.75 mm)
• Melting temperature: 165–180°C
• Heat deflection temperature: 55°C
• Density g/cm³: 1.24
• Water absorption: 0.5%
• Recommended printing speed: 50–100 mm/s
• Bubbles: 100% bubble-free
• Weight: 1 kg/roll
• Length: 1.75 mm (1 kg) = 330 m, 3.0 mm (1 kg) = 110 m
• Safety data sheet: Kind: PLA