SYNERGY21 LED Flex Strip 2835 - 30 lämmin valkoinen DC12V 12W IP20

The SYNERGY21 LED Flex Strip 2835 - 30 is a five-meter roll of warm white light, built around efficient SMD 2835 diodes. It delivers a cosy atmosphere without the heat or bulk of traditional light sources. With a low 12V power requirement and simple self-adhesive mounting, it is one of the easiest ways to upgrade a room, shelf, or display with professional-grade illumination.

Highlights

• Length: 5 metres with 30 LEDs per metre (150 total SMD 2835 LEDs)
• Colour temperature: warm white between 2700K and 3000K
• Operating voltage: DC 12V with a total power draw of just 12W (2.4W per metre)
• Luminous flux: around 960 lumens per reel, roughly 192 lumens per metre
• IP20 rating for indoor use in dry locations
• Cuttable every 10 cm (3 LEDs) for precise sizing
• Self-adhesive backing for quick peel-and-stick installation
• Dimmable when used with a compatible dimmer

In daily use

Installing this strip is straightforward. Clean the target surface, cut the strip to the exact length at the marked points, and connect it to a suitable 12V driver. The self-adhesive backing holds firmly on wood, metal, glass, and plastic. Because it is dimmable, you can adjust the brightness to match the time of day or the mood of the space. The high CRI (over 80 Ra) ensures colours look natural and vivid. Whether you are adding under-cabinet lighting in the kitchen, accent light behind a television, or cove lighting in the living room, this flexible strip adapts easily to corners and curves.

Full specifications

• Brand: SYNERGY21
• Model: S21-LED-F00143
• MPN: S21-LED-F00143
• EAN: 4038816064622
• Type: LED Flex Strip
• LED type: SMD 2835
• LED quantity: 30 per metre, 150 per roll
• Light colour: Warm White
• Colour temperature: 2700K - 3000K
• Operating voltage: DC 12V
• Total power: 12W
• Power per metre: 2.4W
• Luminous flux: ~960 lm total (~192 lm/m)
• Beam angle: 120°
• CRI: >80 Ra
• IP rating: IP20
• Cutting interval: every 10 cm
• Strip length: 5 m
• Strip width: 8 mm
• Dimmable: Yes

Final note

This LED flex strip requires an external DC 12V power supply that matches the total wattage. It is intended for indoor, dry environments only. Make sure to observe correct polarity when connecting to the driver and follow all safety instructions.