Uppopumppu Gardena 9009-47

The Gardena 9009-47 submersible pump is a compact, utility-focused water pump with a 400 W motor designed for reliable water transfer and drainage. It provides a flow rate up to 10,500 l/h and is rated for submersion down to 7 m, with a maximum delivery head of 5 m. Built in Gardena’s characteristic black and green finish, the unit is intended for seasonal and emergency use where efficient removal of water from flooded spaces, basements, cellars or pools is required.

Advantages

The pump combines a robust motor with a sturdy housing to deliver continuous water flow for domestic and light-commercial tasks. Its rated pumping capacity allows fast water removal while the specified immersion depth and delivery height make it suitable for a wide range of drainage conditions. The design emphasizes straightforward installation and durability, with materials selected to withstand regular exposure to water. Controls and connections are engineered for compatibility with standard garden hoses and fittings.

Suitable for

• Draining flooded basements, cellars and garages
• Emptying small to medium-sized pools and hot tubs
• Transferring pond or rainwater for garden irrigation
• Temporary dewatering at construction or renovation sites

Key specifications

• Motor power: 400 W
• Maximum flow rate: 10,500 litres per hour
• Maximum immersion depth: 7 metres
• Maximum delivery height (head): 5 metres
• Intended liquid: clean or slightly dirty water without large solids
• Typical housing materials: corrosion-resistant plastics and seal components

How to use

Place the pump on a stable surface at the lowest reachable point in the area to be emptied, ensuring the power cable and connections remain dry and undamaged. Connect an appropriate discharge hose to the outlet and route it to a safe drainage location. Submerge the pump to the required depth without exceeding the maximum immersion rating, then connect to a grounded power supply. Operate the pump according to the on-unit controls; monitor performance during use and shut down power before touching the pump or adjusting hoses. After use, clean visible debris from the inlet and outlet, dry the unit, and store it in a frost-free place.