USB 3.2 -keskitin Exsys EX-11224HMVS — 4-porttinen Gen1-keskitin USB-kaapelilla ja DIN-kiskoasennussarjalla

Exsys EX-11224HMVS is a compact USB 3.2 Gen1 4-port hub that expands a single USB connection into four downstream ports. Supplied with a USB cable and a DIN-rail mounting kit, the hub is designed for installations where reliable USB 3.2 Gen1 data transfer and secure mounting are required. The aluminium housing and industrial mounting option make it suitable for control cabinets, workstations and embedded systems that need multiple USB endpoints without sacrificing data throughput.

Advantages

The hub provides four downstream USB 3.2 Gen1 ports enabling up to 5 Gbps data transfer rates per host link, while remaining backward compatible with USB 2.0 and USB 1.1 devices. Including a dedicated USB cable simplifies installation and ensures compatibility with host ports. The DIN-rail kit enables stable, vibration-resistant mounting in industrial cabinets or racks. The device's compact footprint and passive design reduce the need for additional power supplies and help keep system integration straightforward.

Suitable for

• Connecting multiple USB peripherals (keyboards, mice, barcode scanners) in workstations
• Attaching external storage devices and flash drives for data logging and transfers
• Integrating sensors, cameras or measurement instruments in automation systems
• Mounting inside control cabinets on DIN-rail for industrial and embedded deployments

Key specifications

• USB standard: USB 3.2 Gen1 host interface with backward compatibility to USB 2.0/1.1
• Number of downstream ports: 4
• Maximum host-side transfer rate: up to 5 Gbps (per host connection)
• Connection: supplied USB cable for host connection
• Mounting: DIN-rail mounting kit included for secure installation
• Housing: compact enclosure designed for industrial installations

How to use

Install the DIN-rail mounting kit where a stable mounting point is available inside a cabinet or on a compatible rail. Connect the supplied USB cable from the hub's host connector to the host computer or controller USB port. Plug downstream devices into the four USB ports; the host operating system will enumerate connected devices and configure them according to their drivers. For high-speed data transfer, use USB 3.2 Gen1-compliant cables and devices and ensure the host port supports SuperSpeed operation.

Recommendations

For reliable operation in industrial environments, avoid routing power-hungry devices solely from the hub if they exceed the host port's current supply. Where multiple external drives or powered devices are used, consider using externally powered hubs or devices with their own power supply. Keep USB cable lengths within recommended limits for USB 3.2 Gen1 to maintain optimal signal integrity.